Chauvet DJ Circus 2.0 IRC Kurzanleitung Seite 4

Circus™ 2.0 IRC QRG EN
Display
Control Buttons
Safety Loop
DMX In
Microphone
DMX Out
Overview
(Back)
Fuse Holder
Microphone Sensitivity
Power In
Adjustment Knob
Power Out
Back Panel View
This product has an auto-ranging power supply that can work with an input voltage
AC Power
range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 42 Circus™ 2.0 IRC products at 120 VAC and 78 units at
Power Linking
230 VAC.
Fuse 1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Replacement
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
4