Operation - Go/on FH208-S Gebrauchsanleitung

Original instruction manual

OPERATION

Heater

Plug the appliance into an electric socket.

Turn the thermostat knob in a clockwise direction until
the maximum temperature setting is reached.

Turn the switch to the heating position
0
I
II

Once the room temperature has been reached, slowly
turn the thermostat knob in an anticlockwise direction until
you hear a click. The heater will stop heating and only the
fan continues to.

The heater will turn on and off the heating function on
and off automatically to maintain the room temperature you
have set.

Turn the switch to "0" position to switch off the heater and
then unplug the appliance.
Fan
 Turn the switch to the position «
 You may use the fan throughout the year to circulate the air in
the room.
Overheat Safety Device:
Your heater is fitted with a safety device that switches off the
heating function in the event of overheating. If the safety
device operates, the heating function will stop but the fan will
continue to run to dissipate the heater and so let the heater
completely cool down. Once the temperature had dropped
below the temperature that triggered the safety device, the
6
Off(Stop)
Fan
1000 W
2000 W
» for the fan function.
(I or II).
04/2017
En