Regulating The Grind - Casadio Enea series Gebrauch Und Installation

Note. These operations must be performed with the
appliance off.
Automatic Grinder-Doser
The machine may be adjusted for different grindings (from
ne to course) via a screw (4) as shown on the graded
indicator (18).
On Demand Grinder-Doser
With the Automatic dose adjustment system.
With each adjustment of the grinders, the grinding
time for the coffee doses is automatically adjusted
according to the selected granulometry.
In the On Demand version, adjust the screw (4) on the
grinder for different types of coffee grounds ( ne or coarse).
Variations are shown on the display screen as follows:
Fine grounds › short granulometry bar, low reference
•
value;
Coarse grounds › long granulometry bar, high reference
•
value.
If the coffee is dispensed too slowly, the grind of the coffee
beans is too ne. Turn the ring nut (4) anticlockwise to
obtain a coarser grind (the numbers on the indicator
increase: 2 - 3 - 4 - ...).
If the coffee is dispensed too quickly, the grind of the coffee
beans is too coarse. Turn the ring nut (4) clockwise to
obtain a ner grind (the numbers on the ring nut decrease:
4 - 3 - 2 - ...).

10. Regulating the grind

18
Granulometry
bar
Granulometry
bar
8 EN
COARSE
ON DEMAND VERSION
Fine grounds
Grinding time
Course grounds
Grinding time
FINELY
4
Reference
value
Reference
value