Herunterladen Diese Seite drucken
Dynaudio TV4 Montageanleitung
Dynaudio TV4 Montageanleitung

Dynaudio TV4 Montageanleitung

Performance wandhalterung für tv-displays von 37“ – 55“ bilddiagonale
Verfügbare Sprachen

Verfügbare Sprachen

TV
4
Performance TV Wall Bracket (37" to 55" TVs)
Instruction Manual
ENG
Read these instructions carefully before installing your equipment.
Install the wall bracket in a suitable location using fixings which are appropriate for the wall material and
structure. Consult a qualified builder if you are in any doubt as to the structural integrity of the wall.
Do not attempt to alter or modify any part of the wall mount or it's attachments.
Do not use if any parts are broken or appear to be damaged.
Tighten all bolts and fixings securely. Only use fixings provided with this bracket.
Do not mount your tv near to sources of heat or moisture.
Always have a minimum of two persons to install the wall bracket and tv.
TV Fixing Kit
A - M4 x 20mm
x4
B - M5 x 20mm
C - M6 x 20mm
x4
D - M8 x 25mm
E - M8 x 35mm
F - M4
I - M6
x4
G - M5
J - M8
x4
H - M8
M - M5
I - M6
N - M4
x2
J - M6 x 16mm
x8
K - M8 Nut
1
Mount Bracket To Wall
NOTE:
For ease of installation mount bracket on wall using position 1 and
mark other positions using a spirit level. Then remove fixings from
position 1, remove bracket and drill other positions
Use Fixings suitable for your type of wall construction.
Use All available fixing points
If in any doubt of the suitability of the wall, it's construction or what
type of fixings to use, consult a qualified builder or installer.
1
1
loading

Inhaltszusammenfassung für Dynaudio TV4

  • Seite 4 Performance Wandhalterung für TV-Displays von 37“ – 55“ Bilddiagonale Montage-Anleitung Bitte lesen Sie diese Anleitung vor Montage der TV sorgfältig durch. • Vergewissern Sie sich vor Installation der TV , ob die vorgesehene Wandfläche für die hängende • Befestigung der entsprechenden Last geeignet ist. Verwenden Sie nur Befestigungsmaterial, das auf die Eigenschaften der Wand abgestimmt ist.
  • Seite 5 HINWEIS: Vorbereiten der Arme zur Montage Liegen die Befestigungspunkte des TV-Gerätes waagerecht weniger als 400mm oder mehr als 700 mm auseinander, Erweiterungsplatten nach Erweiterungsplatten nach außen verwenden Sie die beiliegenden Erweiterungsplatten. Bringen Sie innen für waagerechte für waagerechte diese gemäß der unteren Abbildung in eine der rechts gezeigten Positionen, entsprechend dem Lochabstand am TV-Display.
  • Seite 6 1. Schraube zur senkrechten Arretierung (a) 2. Schrauben zur Neigungswinkel-Fixierung an Einstellung der senkrechten Neigung an beiden Armen entfernen beiden Armen lösen a - Schraube zur senkrechten Arretierung b - Schraube zur Fixierung des Neigungswinkels HINWEIS: HINWEIS: Stellen Sie vor dem Lösen der Schrauben Das TV-Display muss beim Lösen der (a) sicher, dass die Schrauben (b) festgezogen sind.