Connections - Sanyo VCC-HD4000 series Bedienungsanleitung

Connections

Connection when Using PoE (Power over Ethernet) Power Supply
This camera provides simultaneous delivery of video in the JPEG and H.264 formats and also
bi-directional video between the camera and PC.
● Do not use the power supply of the camera.
● Do not supply power to the PoE hub or PoE power adapter until the camera installation
is finished.
A
Connect the camera to the LAN through a switching hub using
shielded LAN cables.
You may extend the transmission distance by using multiple switching hubs with PoE support.
For details on the extendable distance, please refer to the hub performance in the specifications,
etc.
Switching hub
with PoE support
B
Connect the camera to the LAN through a power adapter and a
switching hub using shielded LAN cables.
Power adapter
✱1
✱1
✱1: LAN cable: CAT5 or higher, straight type, Max. 100 m / 109 yds
HDMI
SD OUT
Switching hub
✱1
Camera Control Unit
✱1
8
PC
HD Monitor
Monitor
PC