General Features; Power Up; Addressable Entry/Exit (Bclink); Programming Mode - Vanderbilt PP500-Cotag Installationsanleitung

10 PP500 Installation Guide

General features

Power Up

Power up will give a rising tone from the Buzzer/
Horn. The default power up configuration is
BCLINK.

Addressable Entry/Exit (BCLINK)

When the reader is using BCLINK configuration
the external jumper connections, defines the ad-
dress of the reader whether it is a Entry or an Exit
reader.

Programming Mode

Programming mode is enabled when powering
up the reader with the 'B' button pressed for 2
seconds. This is indicated by red and green LEDs
blinking.

Timeout Period

When the reader is in programming mode if no
cards are presented to the reader or short code
keys pressed the reader will automatically time out
and return to normal operation after 60 seconds.

Exit Programming Mode

Programming mode can be cancelled by press-
ing 'B' when red and green LEDs are flashing
together.