snep Linear S Bedienungsanleitung Seite 2

Keep the instructions and hand them over to the user of the property.
Safety Instructions
Check the product for transport contents and damage. If you notice any defects or
shortcomings in the delivery or in a product pleace contact the seller immediately.
The luminaire must be disconnected from the mains before installation or maintenance work
to avoid the risk of electric shock!
• The luminaire does not come with a terminal block. The installation or
maintenance of the luminaire should only be carried out by an authorized
person in accordance with these instructions.
• The light source of the luminaire may only be replaced by the manufacturer, a
person authorized by him or an equivalent qualified person.
Instructions
• No changes may be made to the product
• The manufacturer is not responsible for misuse of the product
• The installed product must not be subjected to external mechanical stress
• The installed product must not be exposed to strong chemicals
• Do not look directly at the luminaire that is on
Service instructions
• If necessary, use neutral soap solutions and non-abrasive cleaners to clean
the luminaire
Storage
• The product is stored in a dry and clean environment
• Do not strain the product mechanically or chemically during storage
Brackets:
Use the brackets that came with the shipment only if they are suitable for the intended
purpose. If the fasteners are included in the order, they are packaged separately. Please note
that for partial shipments, mounts may only be included with the first delivery batch.
The number of fasteners must be used according to the instructions (see table).
Note! When installing sports facilities, one piece / luminaire should be added to the number
of brackets used.
Brackets:
https://snep.fi/application/files/1015/4902/2139/SNEP_Linear_kiinnikkeet_en_de.pdf