Care and maintenance
The product can be wiped clean using a soft, damp cloth. Never use abrasive cleaning
agents or solvents.
Troubleshooting guide
Problem
Cause
Nothing is
The batteries are inserted
shown on
incorrectly.
the display.
The batteries are flat.
No sound.
The volume switch is in
the OFF position.
The audio source is not
switched on.
The audio cable is not con-
nected properly.
Background
The radio station is not tuned
noise.
in correctly.
Poor signal reception.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Solution
Remove the batteries and insert
them correctly.
Change the batteries.
Turn the volume switch clockwise.
Start playback on the external audio
source.
Check that the audio cable is fully
plugged in.
Adjust the frequency.
Change the batteries.
6