BlackVue Power Magic Ultra Battery B-124 Benutzerhandbuch Seite 7

Installation guide
1. Set the power switch to the OFF position.
Expansion Dashcam
2. For DIY installation using a cigarette lighter plug power cable:
a. Plug the cigarette lighter plug power cable into the Ultra Battery's DC in port. Plug the other end of the power cable
into the vehicle's cigarette lighter socket.
b. Set the power switch to the Cigarette position. Proceed to step 3.
Expansion Dashcam
Caution
When using a cigarette lighter plug power cable you must set the switch to Cigarette. If you set the switch to the Hardwire position when
using a cigarette lighter plug power cable it may result in product failure, overheating, ignition, etc.
or
OFF
Cigarette Hardwire
OFF
Expansion Dashcam
Cigarette Hardwire DC in
XT60
Cigarette lighter plug power cable
OFF
Cigarette Hardwire
DC in
DC in
Power Magic Ultra Battery B-124 7