Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Integrated Amplifie
r
E40
User Manual
www.kecesaudio.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für KECES E40

  • Seite 1 Integrated Amplifie User Manual www.kecesaudio.com...
  • Seite 2: Get Started

    E40 USER MANUAL WARNING  Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty.  To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
  • Seite 3: Fcc Compliance Statement

    E40 USER MANUAL explanations. FCC Compliance Statement Information to the user: This unit has been tested and found to comply with the limits for FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Seite 4: Pack Contents

    E40 USER MANUAL Pack Contents KECES E40 AC Power Cord User Manual Warranty card Feature 1. 50 watts per channel @ 8 ohm. 2. Asynchronous USB 2.0 supports PCM up to 48kHz/16-bit. 3. Phono input for MM with 47k ohm.
  • Seite 5: Technical Specifications

    E40 USER MANUAL Technical Specifications 50W x2 @ 8ohm Power Output 65W x2 @ 4ohm Power Bandwidth 10Hz – 100kHz Current Capacity 15 amperes peak per channel <0.008% at 1kHz A-Weighting Total Harmonic Distortion <0.02% at 1kHz A-Weighting Phono MM...
  • Seite 6 E40 USER MANUAL Interface...
  • Seite 7 E40 USER MANUAL 1. On/Off: When power On from AC Inlet, the Standby LED will light and then press this button the Standby LED will extinguished (E40 work). 2. Headphone Jack: 3.5mm headphone jack. 3. IR receiver. 4-7. Current input source: USB/Analog 1/ Analog 2/ Phono 8.
  • Seite 8 Integrated Amplifie 使用手冊 Class A/B, 40 watts per channel...
  • Seite 9 E40 USER MANUAL 產品內容 保修卡 KECES E40 AC 電源線 使用說明書 產品特性 1. 在 8 Ohm 的負載下每一聲道 50 瓦輸出。 2. USB DAC 支援 PCM 16bit/48kHz。 3. Phono MM 輸入阻抗 47k 歐姆。 4. 2 組 RCA 輸入。 5. Preout 前級輸出。 6. 音量記憶和遙控器控制。...
  • Seite 10 E40 USER MANUAL 介面說明...
  • Seite 11 E40 USER MANUAL 1. On/Off: 當從 AC 插座的總電源開啟時,Standby 的指示燈會亮起,這時按下 此顆按鈕,機器會進入工作狀態。 2. 耳機插座:3.5mm 的耳機插座。 3. 紅外線接收窗。 4~7. 當前訊源輸入指示:USB/Analog 1/Analog 2/Phono。 8. 訊源輸入選擇。 9. 音量控制旋鈕。 10. 黑膠訊源輸入。 11-12. RCA 輸入。 13. 前級輸出:可以增加一個重低音喇叭和 bypass 後級只有前級輸出。 14. USB 輸入。 15-16. 喇叭輸出。 17. AC 輸入。...
  • Seite 12 Integrated Amplifier Bedienungsanleitung www.kecesaudio.de Robert Ross Audiophile Produkte GmbH Alemannenstr.23, 85095 Denkendorf Germany Tel.: 08466-905030 email: r.ross@robertross.de WEEE Reg.Nr.: DE84907860...
  • Seite 13 E40 USER MANUAL WARNUNG  Das Gerät ist ausnahmslos nur in trockenen Innenräumen zu betreiben.  Niemals mit Feuchtigkeit in Verbindung bringen  Niemals das Gerät öffnen. STROMSCHLAGGEFAHR ! Dies ist nur Fachpersonal gestattet.  Schließen Sie das Gerät nur an eine vorschriftsmäßig installierte und geerdete Netzsteckdose an.
  • Seite 14: Fangen Wir An

     Einstellungen: Erklärt die Bedienung und die Einstellmöglichkeiten. CE Statement Dieses Produkt ist mit der nach Richtlinie 2014/30/EU und 2014/35/EU vorgeschriebenen Kennzeichnung versehen: Mit dem CE Zeichen erklärt KECES, dass das Produkt die grundlegenden Anforderungen und Richtlinien der europäischen Bestimmungen erfüllt.
  • Seite 15 E40 USER MANUAL Lieferumfang 1. KECES E40 IEC-Stromkabel 4. Garantiekarte Bedienungsanleitung Merkmale 1. 50 Watt pro Kanal bei 8 Ohm 2. USB 2.0 asynchron PCM bis zu 16Bit/48kHz 3. Phono Eingang MM mit 47k Ohm. 4. Zwei analoge RCA/Chinch Eingänge 5.
  • Seite 16: Technische Daten

    E40 USER MANUAL Technische Daten 50W x2 @ 8 Ohm Leistung 65W x2 @ 4 Ohm Frequenzgang 10 Hz – 100 kHz Stromstärke 15 Ampere Peak pro Kanal <0.008% at 1kHz A-Weighting Total Harmonic Distortion Phono MM <0.02% at 1kHz A-Weighting...
  • Seite 17: Anschlüsse & Bedienelemente

    E40 USER MANUAL Anschlüsse & Bedienelemente...
  • Seite 18 E40 USER MANUAL 1. On/Off: Bei anliegender Netzspannung leuchtet die LED : „Standby“ durch Drücken des „On/Off Tasters erlischt die Standby LED und der KECES E40 ist betriebsbereit. 2. 3,5mm Kopfhörerausgang 3. IR Empfänger - Auge 4. -7. Gewählter Eingang: USB, AUX 1, AUX 2, Phono 8.

Inhaltsverzeichnis