Before Use; Intended Use - aidapt VM967B Bedienungsanleitung

INTRODUCTION
Thank you for deciding to purchase the LED Clip Light from Aidapt. The LED Clip
Light is manufactured from the finest materials available. When used correctly it is
designed to give many years of reliable, trouble-free service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

A lightweight LED Clip Light for reading in areas of low light. The LED Clip Light is
ideal for both home and travel. Use the Clip Light in bed without disturbing your
partner or take it in the car for long journeys.
Requires 2xCR1220 Batteries (included).
INSTRUCTIONS FOR USE
Press the heavy duty clip to open it and position the LED Clip Light onto
•
the book or map, etc. Release the clip to secure the Clip Light as desired.
Move the flexible neck of the LED Clip Light to achieve the angle and
•
distance required.
Press the on/off switch on the head of the LED Clip Light. Remember to
•
switch the light off when not in use to preserve battery life.
To change the battery, use a small cross head screwdriver to undo the
•
battery compartment at the rear of the heavy duty fixing clip.
CLEANING
Clean your LED Clip Light using a mild detergent with a slightly damp, soft cloth
only. Only use a mild detergent or disinfectant; never use an abrasive cleaner. Do
not submerge the LED Clip Light.
After cleaning, use a soft, dry cloth to wipe the magnifier and stand.
Usage and Maintenance Instructions
2
Ver. 2 08/2012 (2221)