Safety Instructions - Lightmaxx DMX FORGE 192 Bedienungsanleitung

ENGLISH

Safety instructions:

DANGER! (For babies and children)
Packaging, plastic films and other packaging materials must be properly stored or
disposed of. They must be kept out of the reach of babies and children due to the risk
of suffocation.
Make sure that children never use the device unattended! In addition, make sure that
children do not remove any (small) parts from the device, as they could suffocate by
swallowing them!
DANGER! (Electrical shock due to high voltages in the device)
Do not remove the housing. There are no parts to be maintained in the device. Inside
the device there are components which are under high electrical voltage.
The device must not be used as soon as damage or the absence of components,
protective devices or housing parts is noticed!
DANGER! (Electric shock caused by short circuit)
Modifications to the power cord or plug are prohibited. Failure to do so may result in fire
or death due to electric shock!
NOTE! (Fire hazard)
Ensure that the unit is not exposed to a direct source of heat and is used away from
open fire. Never cover or tape any ventilation slits or the device itself.
NOTE! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor use. Never expose
the device to rain, moisture or liquids as this may cause damage. Vibrations, dirt or
sunlight can also cause damage - avoid them!
NOTE! (Power supply)
It is essential that you check that the device voltage matches your local mains voltage.
It is strongly recommended that you fuse your mains socket with a residual current
circuit breaker (FI).
If you do not use your device for a longer period of time, disconnect it from the mains.
to minimize danger. The same applies to storm conditions such as thunderstorms or
floods, etc..
NOTE! (Risk of overheating)
The max. permissible ambient temperature of this device is 40° C.
Make sure that the device is always adequately ventilated.
NOTE! (Error during data transmission)
Never connect the DMX input or output to audio devices such as power amplifiers or
mixers!
DMX cables enable trouble-free operation and the highest possible transmission
reliability of signal data. Do not use microphone cables.