eFuse 2 300-10
The calibration menu only is available for service. Calibration is factory set.
Figure 4-1: Menu structure
5. Serial interface
5.1.
Protocol definition
The eFuse 2 can be controlled externally via a Serial Interface (7 in
figure 6.1). Communication is done with the following parameters:
9600 Baud
8 Data- Bits
1 Stop- Bit
Every command has to be finished with escape sign „\n".
manual efuse2-300-10_neu.docx rev02
14
Ausgabe 20.01.2017