Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please read and follow the instructions carefully:
1. Remove all the contents from the box.
2. Ensure that you protect the paintwork of the trolley during assembly by
placing the trolley on carpet or a large sheet of cardboard.
3. Take the trolley frame and place it upside down and carefully insert the
tapered section of the brown painted leg assembly into the body of the
trolley frame.
4. Insert the leg retention clip. Ensure that the retention clip passes all the
way through.
5. Ensure that all four extension legs are adjusted to the same height and
then turn the frame upright.
6. Test the trolley for stability thoroughly and visually check that all four leg
retention clips are in place.
NB. Do not use the leg retention clips to adjust the
trolley height.
Place the two detachable arms into the
7.
locating holes with the higher part of the arms
towards the front of the trolley.
N.B. Ensure both arms are fully located in place and
the four brass buttons pass completely through the
frame; they should protrude approximately 5 mm
out from the main frame.
8. Clip on both trolley trays with the flared edge
towards the front of the trolley.
Your completed trolley should now look like the image
to the right.
Usage and Maintenance Instructions
3
Ver. 1 06/2012 (1695)
Werbung
Inhaltsverzeichnis
