Installation - Zee Sidra Gebrauchsanleitung

MANUAL
CONTENTS
Wall hanger ( ASA )
∙
∙ Connector ( ABS )
∙ Connector with water stop ( ABS )
3 x adapter: ½", ¾" and 1" ( ABS )
∙
Spray gun ( ABS )
∙
Nozzle ( ABS )
∙
∙ 3 x screws and plugs
20 m hose ( PVC = REACH compliant )
∙

INSTALLATION

01. With the wall hanger, mark the
points where you will have to drill
the holes.
02. Drill the holes 4 cm deep with a
Ø 5 mm drill.
03. Insert the plugs.
04. Place the wall mount on the plugs
and screw tight.
ATTENTION
→ Tighten screws with a manual
screwdriver.
→ If the screws are screwed too tight
using an electrical screwdriver/drill,
the wall mount can crack.
LET'S FEED
LET'S CLEAN
LET'S PLAY!
3
ENGLISH INSTALLATION
ATTENTION: TIGHTEN SCREWS WITH A MANUAL SCREWDRIVER.
IF THE SCREWS ARE SCREWED TOO TIGHT USING AN ELECTRICAL SCREWDRIVER/DRILL,
THE WALL MOUNT CAN CRACK.
Ø 5 mm
SIDRA
4