Initial Power-Up - HEIDENHAIN MSE 1000 Installationsanleitung

Wiring the power connector (ID 747501-01)
The MSE 1201 includes a power connector that needs to be wired to a suitable power
cord; see Power cord on the previous page.
To wire the power connector:
Verify that the power cord is not plugged into the main power supply
X X
Wire the power connector according to the illustration on the right
X X
Connecting a power cord
To connect a power cord (ID 747501-01):
Verify that the power switch is in the off position
X X
Verify that the power cord is not plugged into the main power supply
X X
Insert the female end of the power cord into the power connector 4 on the front of
X X
the module
To connect a power cord (ID 747501-02):
Verify that there is no power at the source
X X
Wire the power cable to the source
X X
7. Initial power­up
To power-up the system (ID 747501-01):
Press the On (supply) side of the power switch to power-up the system
X X
To power-up the system (ID 747501-02):
Turn power on for the system
X X
Wiring the power connector
ID 747501-01
25