Error Displays/Messages - Mercedes-Benz Sound ONE Bedienungsanleitung

Error displays/Messages

ERROR
The unit cannot be operated because of some problem.
t Press the RESET button (page 4).
FAILURE
The connection of speaker/amplifier is incorrect.
t See the supplied installation/connections manual to
check the connection.
L.SEEK +/–
The local seek mode is on during automatic tuning.
NO AF
There is no alternative frequency for the current
station.
t Press (SEEK) –/+ while the programme service
name is flashing. The unit starts searching for
another frequency with the same PI (Programme
Identification) data ("PI SEEK" appears).
NO ID3
ID3 tag information is not written in the MP3 file.
NO INFO
Text information is not written in the ATRAC3/
ATRAC3plus or WMA file.
NO MUSIC
The disc is not a music file.
t Insert a music CD.
NO NAME
A track/album/group/disk name is not written in the
track.
NO TP
The unit will continue searching for available TP
stations.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your nearest
Mercedes-Benz service centre.
PINERROR
The CAN High/CAN Low terminals and ACC
terminal are connected at the same time.
t Disconnect the ACC terminal.
READ
The unit is reading all track and group information on
the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
UNREAD
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disk has been inserted.
• The disc cannot play because of some problem.
t Insert another disc.
" " or "
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
" "
16
The character cannot be displayed with the unit.
If these solutions do not help improve the situation,
consult your nearest Mercedes-Benz service centre.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.
"