Additional Information - Velleman PCUSBVGA2 Bedienungsanleitung

You will see a red border on the DisplayLink screen. The red border shows the size of the new Windows
desktop.
2. Use the "+" and "–" buttons in the Fit to TV window to change the size of the red border until it fits on the
TV screen.
Note: You can finetune by holding down the CTRL key and clicking the "+" and "–" buttons.
3. Once the red border is at the edges of the TV screen, click Apply to resize the Windows desktop.

8.7. Additional Information

The following section provides additional information on the use of the DisplayLink software.
DirectX 10 Game Support
This software release contains support for some DirectX 10 games on Windows 7. To improve the gaming
experience, it is recommended that:
• anti-aliasing (AA) settings are turned OFF
• locking to vsync is turned ON.
These options are usually configurable within the DirectX 10 game.
To play 3D games on a display connected via the adapter with reasonable performance, the system specs must
meet the game's recommended hardware specification, not just the minimum specification.
Monitor Calibration
Monitors can be calibrated with applications that use the Display Data Channel Command Interface (DDC/CI).
Both monitor and application must support DDC/CI for this to work. An example of such an application is
ScreenWhite.
DDC/CI is not supported on displays with integrated DisplayLink technology, for example mini monitors.
Media Playback
In Windows 7, Vista and XP (in extended mode), the adapter can display media files and DVDs using the
following media players:
• Windows Media Player 11 (www.microsoft.com/windows/windowsmedia/default.mspx)
• WinDVD 8 (www.intervideo.com)
• PowerDVD 7 (www.cyberlink.com)
• RealPlayer 11 (www.real.com).
The adapter can display media files and DVDs using most media players. Media playback in mirrored mode (XP)
or in Basic mode (Vista and Windows 7) is not recommended.
Using Multiple Adapters
The software supports up to six displays simultaneously connected via 6 adapters. It is also possible that
different sets of displays are used at different times, for example two in the office and two at home. The
software saves each screen's display profile separately. This allows for four different physical positionings or
different resolutions of connected displays in the office and the home.
Standby and Hibernate, Shut Down and Restart
If the PC to which the adapter is connected, is placed into standby or hibernate mode, the display goes blank.
When the PC is powered up again (and unlocked if necessary) the connected display returns to the same mode
as it was before standby or hibernation.
If the PC is shut down, restarted and the user has logged in, again the connected display returns to the same
mode as it was before shutdown.
Adapters with Multiple Users
The adapter works with multiple users on the PC. The mode settings are saved for each user so they can use
their own desktop configuration.
Disconnecting the Adapter
If the adapter is powered off or the USB cable is disconnected from the computer, the display goes blank. All
windows and icons move to the primary display.
On reconnection or powering up of the adapter, the display returns to the same mode as it was before
disconnection. However, the windows and icons that were moved to the primary display will not be moved back
automatically to the secondary display.
V. 02 – 26/04/2012
PCUSBVGA2
15 ©Velleman nv