AGPtek A11 Bedienungsanleitung Seite 6

for WAV format; 32/64/128kbps for MP3 format;
 Input gain set: Select class from 0-7(the higher level
you choose, the wider the recording distance it will
be, meanwhile, the bigger noise it will have. So it is
suggested to use lower level when the environment
is quiet and short in distance);
 Track AVR mode: Choose Normal/AVR mode;
Note: When choose AVR mode, and click REC
button to start recording, the recorder will start
recording automatically if sound is detected with
blue indication light on and stop recording when no
sound detected;
 VC sensitivity: Choose from 1-4 levels;
 Recording monitor: Choose ON/OFF for the monitor.
Record and listen what you hear simultaneously:
Choose "ON", then insert the earphone, click REC
button to start recording, you will hear the
recordings from the earphone at the same time;
choose "OFF" to turn it off.
 monitor volume: Choose from 1-5;
 Auto record:
1) Choose "Record on/off" to start/stop record
automatically;
2) "start time" to set the beginning time to record;
3) "end time" to set the ending time to record;
4) "Auto record cycle"to set the record frequency
for Once/Daily.
Note: Set the time of this recorder according to the
local time before you start auto record. This function is
4