Program Start Of Heating Or Ventilation; Deactivate Preset Time - Webasto 1533 Bedienungs- Und Wartungsanweisung

Program start of heating or ventilation

D
Press the
GB
Press the button "Forward"
required time for starting heating operation is displayed.
If a different program number is required, the
10 seconds.
Default settings:
Time 1:
Time 2:
Time 3:
Note:
The default settings are overwritten when new values are entered. The preset
times are saved until changed. If you disconnect the clock from the electrical
system (for example by disconnecting the battery), the factory default settings
will be reset.

Deactivate preset time

Briefly press the
14
button.
or "Reverse"
6 hours
16 hours
22 hours
button.
within 10 seconds until the
button must be pressed within