Herunterladen Diese Seite drucken

AEC ILLUMINAZIONE Q-DROME Montageanleitung Seite 9

Werbung

Mounting Instructions
Product: Q-DROME
Technical Division
Manutenzione interna - Internal maintenance - Interne Wartung
7
Sostituzione modulo LED: b-a
Replacement LED module: b-a
Ersatz des LED-Moduls: b-a
n°2 viti che fissano ogni PCB
n°2 screws that fix the PCB
2 Schrauben, die jede Leiterplatte befestigen
TX20
1Nm
MANUTENZIONE SPD
Il dispositivo di protezione installato nell'apparecchio è dotato di un sistema di interruzione del circuito a fine vita che
esclude l'alimentazione dell'apparecchio.
In caso di spegnimento dell'apparecchio ad impianto alimentato, controllare l'attività del dispositivo tramite il LED di
segnalazione.
SPD MAINTENANCE
The protection device is equipped with system that excludes power supply at the end of life of the luminaire.
If the luminaires switches-off when the system is still fed, the activity of the protection device should be checked
looking at signaling LED.
SPD ÜBERSPANNUNGSSCHUTZMODUL
Der Überspannungsschutz hat ein System das die Stromversorgung am Ende der Lebensdauer der Leuchte
abschaltet.
Wenn die Leuchte bei anliegender Netzspannung abschaltet, sollte der Überspannungsschutz überprüft werden
(Signal-LED).
LED ACCESO: Scaricatore funzionante
LED ON: Right functioning of SPD
LED leuchtet: SPD-Modul funktioniert
rev. 03 of 14/02/19
Made in Italy
b-a
b-a
b-a
a
LED SPENTO: Scaricatore a fine vita da sostituire
LED OFF: Replace the SPD
LED aus: SPD-Modul muss ausgetauscht werden
Connettore PCB
PCB connector
PCB-Anschluss
b
Pag. 9 of 12

Werbung

loading

Verwandte Produkte für AEC ILLUMINAZIONE Q-DROME