Chorus GW90871 Bedienungsanleitung Seite 23

Group address Table on two levels:
KNX 2 Level Structure
Main Groups UG
0-15 (S1) 0-511
0-15 (S1) 511-1023
0-15 (S1) 1024-1535
0-15 (S1) 1536-1543
0-15 (S1) 1544-1551
0-15 (S1) 1552
0-15 (S1) 1553
0-15 (S1) 1554
0-15 (S1) 1555
0-15 (S1) 1556
Value DMX512 Sequence
Chan- Nr.
nel Nr.
0..255 001-512 -
0..255 001-512 -
-7..+7 001-512 -
0/1 ALL 0/7
0/1 ALL 0/7
0/1 ALL -
0..255 ALL -
0..7 ALL -
0..7 ALL -
0/1 ALL -
KNX-DMX Gate- Detail
way Function
DPT 5.001 trans- 1 Byte value is stored
mits 1byte value into the corresponding
(Absolute value) DMX-Channel directly
DPT 1.001 value When a 1 is received
transmission the value stored in
sequence Nr. 8 is sent
to the correspond-
ing DMX-Channel
When a 0 is received
the DMX-Channel
is turned off.
DPT 3.007 value Relatively lighter or
transmission darker dimming than
the current level
DPT 1.001 value The selected sequence
transmission values of all 512 chan-
Access saved nels are transmitted
sequences on the DMX512 bus
DPT 1.001 value All current DMX values
transmission in channels 1-512 are
Save the new stored in the selected
sequence sequence position
DPT 1.001 value All 512 channels
transmission display 100% when
All channels 1 is transmitted, 0%
central on when 0 is transmitted
DPT 5.001 value Repetition rate
transmission of 10msec
Repetition rate Value default 3
parameters
DPT 3.007 value Dim repitition value
transmission Value Default 15=1%
Set downward
dimming curve
DPT 3.007 value Dim repitition value
transmission Value Default 15=1%
Set upward
dimming curve
DPT 1.001 value Disables auto-
transmission matic dimming
Deactivate auto- when value = 0
matic dimming
23