Markings On The Frame; Connection Of A Pool Cleaner - Ocean Skimmer De Luxe PT Bedienungsanleitung

2.4 Markings on the frame

The frame shows max/min markings for visual water level inspection.
Water levels below min. marking may damage pump!
The ideal water level is 1/3 below the max. marking.
If the water level gets closer to the lowest marking, special care regarding the
flow rate has to be paid, as otherwise the circulating pump may be harmed.
With very small pumps with a low flow rate the surface stream can be raised
by a reduction of the foam within the skimmer weir.

3 Connection of a pool cleaner

1) Take skimmer lid off
2) Fill hose with water
3) Connect hose to vacuum plate
4) Put vacuum plate on to basket (see above)
5) Remove end cap from skimmer after cleaning the pump
6) Clean basket
7) Insert basket and push handle back
8) Put lid back on skimmer
Do not leave vacuum plate without hose attached on basket in the
skimmer with pump running!
to cleaner
pool hose Ø32/38
41
vacuum plate