trendworx 1127 Bedienungsanleitung

English
Electric Shoe Warmer and Dryer
Features
Dries and keeps shoes, boots and gloves warm
Two 15cm long heating elements with power cable
Both heating elements work simultaneously
Maximum temperature after approximately 20 minutes: 50°C
Power: 8W, voltage: 230V
Do not use on heat sensitive materials or leather
How to get started
1. Remove the Electric Shoe Warmer and Dryer from the packaging and connect to a
power socket. The heating process will start. A light displays on the power unit
whilst in heating mode.
2. Insert the heating elements into your shoes, boots or gloves.
3. After approximately 20 minutes the heating elements will reach a maximum
temperature of 50°C.
4. Leave the heating elements in your shoes or gloves until they are fully dry or warm.
However, do not use for longer than eight hours.
5. Unplug the device and remove the heating elements from your shoes or gloves.
Position the elements on a surface that is not heat sensitive to cool down.
Safety instructions
This instruction manual provides information for safe use of the Electric Shoe Warmer
and Dryer. Please retain this manual for future reference.
The Electric Shoe Warmer and Dryer should not be used outside, in bathrooms or
in other damp rooms e.g. cellars.
The Electric Shoe Warmer and Dryer is only to be used for shoes, boots and gloves.
Do not dry other wet items e.g. clothing.
(continued on page 2)
Instruction Manual
1