prologue YP08407/01 Bedienungsanleitung

Digital Watch Benämning
Art.no: 36-4047 Art.no: XX-XXXX Model: YP08407/01 Model: XXXXX
Please read the entire instruction manual before using Please read the entire instruction manual before use and save for future reference.
the product and save it for future reference. We reserve the right We apologise for any text or photo errors and any changes of technical data. If you have any
for any errors in text or images and any necessary changes questions concerning technical problems please contact our Customer Service Department.
made to technical data. If you have any questions regarding
technical problems please contact Customer Services.
Description
Features
• Displays time, year, month, date and day
• Stopwatch with split-time function
• Timer function
• Alarm
• 12/24 hour display
• Backlight
• Water resistant to 10 ATM
Buttons
A
B
A. Reset button
B. Mode button
C. Backlight button
D. Start/stop button
Display
Date display
Month display
Alarm
Hours display
Minutes display
Use
Press MODE (B) repeatedly to change functions. The sequence is:
Time – stopwatch – countdown timer – alarm.
A. Time
• 12/24-hour display
• Hours, minutes, seconds, day and date display
• 100-year calendar (2000–2099)
B. Stopwatch SP
• Accuracy: 1/100 second
• Stopwatch range: 00:00:00–23:59:59
C. Countdown timer TR
Countdown range: 23:59:59–00:00:00
GREAT BRITAIN: For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Internet: www.clasohlson.co.uk
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
D. Alarm AL
•
•
Setting the time
Analogue
1. Pull out the adjustment crown and turn it
2. Push the adjustment crown back in to
Digital
1. When the watch is in time display mode
2. Press start/stop (D) to reset the seconds display.
D
3. Press MODE (B) to switch to the next setting.
C
4. Press start/stop (D) repeatedly to increase
5. Repeat steps 3 and 4 for the remaining settings.
6. Push RESET (A) when you have completed inputting all
Digital seconds
display
Hourly chime
Switching between the 12 and 24 hour display
activated
When the watch is in time display mode, press
start/stop (D) once to switch between 12 and
24 hour display. "PM" will be displayed when in
Seconds display
12 hour display mode.
Stopwatch
Without split-time
1. Press MODE (B) the required number of
2. Press start/stop (D) to start
3. Stop the stopwatch by
4. Press RESET (A) to reset
Alarm sounds daily at the set time
5 alarms
to adjust the minute and hour hands.
restart the analogue watch.
press and hold RESET (A) until the seconds
display starts to flash.
the digits incrementally. Hold the button in to
increase the digits quickly.
The settings sequence is as follows: Seconds – hours –
minutes – year – month – date.
your settings. The day is automatically set when the year,
month and date is set.
times to reach the stopwatch settings (SP).
the stopwatch.
pressing start/stop (D) again.
the stopwatch back to zero.
20140307