Software Updating; Specifications - Leuchtkraft RDMX-8 Bedienungsanleitung

6 Software updating

The software can be upgraded via SD card as
following steps:
1) Copy the new software (SSCR10AM &
SSCR10AS) to the root directory of SD card .
2) Insert SD card and press MENU button till
SYSTEM setup [new software]
shows on display .
3) Press ENTER button .

7 Specifications

Default
LAN IP address: . . . . . 2 .114 .34 .200
Default
WiFi IP address: . . . . . 002 .000 .001 .001
DMX In: . . . . . . . . . . 2 × 3 pin XLR male
DMX Out: . . . . . . . . . 2 × 3 pin XLR female
Power supply: . . . . . . 100 – 240 V, 50 – 60 Hz
Power consumption: . 10 VA max .
Mains fuse: . . . . . . . . F1 A / 250 V
Dimensions
(W × H × D): . . . . . . . 225 × 55 × 130 mm
Weight: . . . . . . . . . . 800 g
Subject to technical modification .
All rights reserved by MONACOR
& Co. KG. No part of this instruction manual may be
reproduced in any form or by any means for any com-
mercial use.
INTERNATIONAL GmbH
®
19