Short Cycle Timer, 0–60 min/0–6 hours
Art.no 36-5574, 36-5575
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our customer services.
Safety
•
Electrical devices connected to the timer should be intended for use with a 230 V AC, 50 Hz
power supply.
•
This timer is designed for indoor use only.
•
Make sure that the plug of the connected device is pressed all the way into the socket of the timer.
•
Never expose the timer to impacts, shocks, rain or moisture.
Countdown time range
Differences between the 2 models:
•
36-5574: The 0–60-minute timer has a minimum operating cycle of 1 minute.
•
36-5575: The 0–6-hour timer has a minimum operating cycle of 5 minutes.
Setting the time
Turn the setting dial clockwise, the countdown time is indicated by the digit the arrow points to.
When the arrow points to OFF the power to the load device is turned off.
Connection
1. Set the desired countdown time and plug the load device into the socket of the timer. Make sure that
the load device is switched off.
2. Plug the timer into a wall socket and switch the load device on.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Power supply
Max load
Operating temperature
Accuracy
GREAT BRITAIN • CUSTOMER SERVICE
tel: 0845 300 9799 internet: www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk
Model 7G1H/1A, 7G6H/1A
230 V AC, 50 Hz
16 A resistive, 2 A inductive
0–55 ºC
36-5574: ±10 sec, 36-5575: ±1 min