First Use - Soehnle FIT CONNECT 100 Bedienungsanleitung

4. First use

Charging the battery
Fully charge the Fitness Tracker before initial use. To do
this, remove the display module (A) from the strap (B)
by pressing the strap inwards on the right side (4.1)
until the display module is released. Pull the display
module out of the strap (4.2). Plug the USB plug of the
display module (D) into a standard active USB port.
Note that the contacts of the module (4.3) touch the
contacts of the USB port, otherwise the device will not
charge. The display (5.1) shows the state of charge of
the battery ( = fully charged / = battery exhausted).
Install the Soehnle Connect app
Android
Bluetooth
For full functionality, install the free Soehnle Con-
nect app on your smartphone or tablet. Scan the
QR code below to get to the app in the appstore. Al-
ternatively, you can find the app for your Android™
device on Google Play or for your Apple® device on
the Apple App Store. Please note the exact name of
the app when searching: "Soehnle Connect".
: ≥ 6.0 • iOS
™ ® : ≥ 9.0,
® : ≥ 4.0
GB