Werbung
User Manual
Introduction
Thank you for purchasing a splitter from the DVI-D range of products. These devices are high
performance DVI-D distribution amplifiers. They allow a DVI-D signal to be split to 2, 4 or 8 DVI-
D enabled displays or projectors for multi-screen presentation.
The DVI-D dual link versions with 2 (38107) and 4 (38104) output ports do not support HDCP
signals and should only be used for DVI-D dual link signals with higher resolutions up to
2560x1600.
Package Contents
▪ DVI-D Splitter
▪ 5V DC PSU
▪ This user manual
Features
▪ Dual link versions support resolutions up to 2560x1600
▪ Can be cascaded up to 3 layers depending on the cable quality
Specification
▪ Compliant with DVI 1.0 specification
▪ Amplified outputs allow cable lengths of up to 15m when using DVI SLD cables
Installation
• Make sure all devices are powered off before making any connections!
• Connect all cables and power supplies to the sources, switches and displays.
• Power on the displays, splitter then the source devices to avoid any connection issues.
NOTE: We recommend you do not use dual link splitters with resolutions of 1920x1200, 1080p60
or below. This may cause signal issues and lack of picture on your displays.
English
Werbung
