Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GETTING STARTED
1.
Connect the device to power supply mains with an included power adapter: plug
the supplied power adapter into the DC-in socket (on the rear of the speaker)
and the other end into a power mains socket.
2.
Press the standby button on the device or on the remote control to switch the
device on. The screen will display "Welcome" notification.
3.
When switched on for the first time, the radio will scan for available networks.
User can configure network manually, via WPS or withhold from connecting
with a network. Use direction buttons on the remote control or Select knob on
the device to navigate through options.
1.
Select "Yes" to configure network manually: Choose the desired network
you want to connect. Then enter password if necessary. Enter each sign
using numeric buttons on the remote or by rotating Select knob on the
device, and press
move to next sign. Press Ok button on the remote or press Select button
on the device to confirm.
2.
Select "Yes (WPS)" to configure network with use of WPS function: the
speaker will request pressing the WPS button on your router within 120
seconds. When pressed, the device will automatically connect with network.
3.
Select "No" to withhold from connecting to network.
4.
When connected successfully, you will see the Wi-Fi logo in the upper left corner.
OPERATION
Standby
Press the standby button on the remote control or press the home/standby button
on the front panel to wake up the unit or switch to the standby mode.
Note: the device has to be connected to power supply beforehand!
Source change
Press the key button to switch between sound sources: AUX, Bluetooth, UPnP,
Internet radio, DAB, FM.
Note: by default, the key button is set to change mode. The button's action can be
adjusted in Configuration.
Menu
Press the MENU button on the remote control to enter the menu. Press
or rotate the volume/select knob to select appropriate.
Volume
Press the VOL+/- buttons on the remote control or rotate the volume knob on the
front panel to adjust the volume.
20
button on the remote or RIGHT button on the device to
Owner's manual
/
buttons
Werbung
Inhaltsverzeichnis
