Herunterladen Inhalt Inhalt Diese Seite drucken

Risk Of Electric Shock - Clatronic LS 3658 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
WARNING of electrical shock!
• The device is intended for use with safety extra-low voltage.
Connect only to a power supply according to the specifications
on the rating label.
• If the connection cable of this device has been damaged, it
must be replaced with a special connection cable available
from the manufacturer or its customer service.
• Do not replace any parts. Do not perform any modifications.

Risk of electric shock!

• This device may be used by children, from the age of 8 and
persons with reduced physical, sensory, or mental capabilities,
or persons with inadequate experience and lack of knowledge
if they are supervised or have been trained and understand the
hazards involved concerning the safe use of the appliance.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
Overview of the Components /
Delivery Scope
1 Shaving foil
2 Long-hair cutter
3 On / off switch
4 Power indicator
5 Stand / Charging station
6 Long-hair attachment
Not shown:
Mains adapter
Cleaning brush
Unpacking the Device
1. Remove the device from its packaging.
2. Check the delivery scope for completeness.
3. The on / off switch has been secured for transport with
protective silicone. Remove this.
26
LS3658_IM
Notes on Use
• The device is operated via charged battery.
• Mere mains operation is not possible.
• Use the device only for dry shaving.
• Place the shaving head in such a way that the
marking points towards on / off switch (see page 3,
fig. A). Make sure that you do not switch the device on
unintentionally.
• For trimming longer hair, slip the long-hair attach-
ment onto the appliance. Attach the extension with
the marking to the right (page 3, Fig. B). It must sit
firmly.
Charging the Battery
• Switch off the device. "O" can be seen on the switch.
• Connect the power adaptor connector with one of the
following jacks:
- The socket directly at the bottom end of the unit.
22.08.16

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis