Windows 2000 - U.S. Robotics 7903 Installationsanleitung

4. Wait for the operating system to copy the files that it needs. When the
Found New Hardware Wizard closes, remove the operating system
installation CD-ROM.
If you are prompted to restart your computer click Yes.
5. Re-insert the U.S. Robotics Installation CD-ROM so that you can com-
plete the setup program.

Windows 2000

If a Digital Signature Not Found window appears, click Yes.
installation is complete when the Found New Hardware Wizard closes.
Windows 98
The operating system starts the new hardware installation automatically.
If the New Hardware Found Wizard requests your Windows 98 CD-ROM,
1. Remove the U.S. Robotics Installation CD-ROM.
2. Insert the operating system installation CD-ROM.
3. In the following command, D represents your CD-ROM drive letter. If
your drive uses a different letter, be sure to type that letter instead of
D. Type D:\ win98 and click OK.
4. Wait for the operating system to copy the files that it needs. When the
New Hardware Found window closes, remove the operating system
installation CD-ROM.
If you are prompted to restart your computer click Yes.
5. Re-insert the U.S. Robotics Installation CD-ROM so that you can com-
plete the setup program.
*** U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and
has verified compatibility with Windows 2000.
***
Hardware
5