Maintenance And Cleaning - Cookmax Lc25R Handbuch

Vorschau ausblenden

Inhalt

Seite von 16

/ 16
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

GENERAL INSTRUCTION

Read carefully the instructions given in this booklet. Before connecting the appliance make sure that the data

shown on the technical plate (Fig.1), corresponds with that of the mains power supply. Before carrying out

any operation, insulate the appliance from the mains power supply. The installation must he carried out by

professionally trained personnel in accordance with the instructions of the manufacturer and current

regulations.

The Manufacturer declines all responsability for:



any damage resulting from ignoring the instructions for installation and use or from irregular use of

the appliance;



any inaccuracies contained in this booklet due to copying or printing errors.

The Manufacturer reserves the right to make alterations thought useful to the product, without changing its

basic characteristincs.

THECNICAL DATA

Dimensions

Power

Power supply

Color lamp

INSTALLTION INSTRUCTIONS

1. The identifying and technical plate is fixed near the electrical connection of the appliance.

2. ELECTRICAL SAFETY RULES

Please observe these essential rules:



the mains voltage and that on the technical plate must be the same;



connection must be to a regulation earthed socket;



connection must be to an equipotential system.

3. ELECTRICAL CONNECTIONS: must be carried out by trained personnel in accordance with electrical

norms. The power cable must be positioned so that no part of it reaches a temperature by 50°C. Before

installation make sure that the socket or switch used can be easily reached when the apliance is in place.

CAUTION: PRODUCER DECLINE ALL RFSPONSABILITY IF THESE SAFETY RULES ARE NOT

OBSERVED.

INSTRUCTION FOR USE

1. The appliance is intended for collective use and must be used by properly trained personnel.

2. Before switching on the machine for the first time, thoroughly clean off the industrial oils.

● Starting up

1. Adjust the height of the lamp by simply pulling or lifting the lamp bell (model LA-LC-LR).

2. Put the plug into the power socket (model LT); press the main switch (A fig.2).

3. Now the appliance is ready to be used.

● Turning off

1. Turn off the main switch.

2. NOTE: even if your machine is off the appliance is still live.