Settings Menu; Additional Information; Troubleshooting - Kensington BungeeAir Power Kurzanleitung

Settings Menu

1
2
3
4
5
1.
2.
3.
4.
5.

Troubleshooting

The following pages take you through the potential troubleshooting options.
No LED indication on fob
Check batteries are good and installed correctly.
The fob alarms immediately, without the warning period
Ensure that the case is completely closed. The Wireless Security Tether requires the
case lid is completely closed for proper operation.
Pressing "Find My Fob / Find my iPhone 4" doesn't produce a sound on the unit I
want to locate
The fob and case are outside BungeeAir's operating range. Walk a short distance
and try again.
22
2 different alarm tones from the fob are heard when moving out of range
The first 10 seconds of the alarm is a simple reminder that the fob and case has
separated. After 10 seconds, the alarm pattern will change.
The iPhone 4 doesn't lock right away when the fob and case are separated
The case will not lock the iPhone until after the first 10 seconds of the alarm have
elapsed and the fob and case remain out of range. This provides the opportunity to
get the case and fob back into range.
My phone call terminates when the iPhone 4 locks
This is the expected experience when the iPhone 4 locks. BungeeAir provides a 10
second reminder before locking the iPhone 4 so that the case and fob can be brought
back into range and not interrupt their iPhone experience.
The BungeeAir app says the BungeeAir is "initializing"
Check that the batteries on the fob are correctly installed, that the iPhone 4 is
securely in the case and the case is properly shut, the fob and case are in range of
each other, and the fob and case are in the "On" position.
BungeeAir is briefly going in and out of range
Being a radio product, the performance will be affected by different environments
(i.e. on a desk, in a pocket, near metal, etc.). Try using the "Long" range setting. If the
condition persists, consider relocating the fob and/or case to change the environment.
If the condition persists when BungeeAir is completely unobstructed, check the
batteries on the fob.

Additional information

The following pages cover additional information about Kensington's
BungeeAir™ Power.
WARNING! IMPORTANT SAFETY INSTRUCTIONS
Failure to read and follow these safety instructions could
result in fire, explosion, electrical shock or other hazard,
causing serious and/or fatal injury and/or property damage.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions
BungeeAir™ Power (which will be known as the BungeeAir for the remainder of
this instruction guide).
away from open flame.
BungeeAir may lead to electrical shock.
23