Installation - Teleco TMATExxxAL serie Anleitung

Installation

Download the app T-Mate from App Store or Google Play. Check the compatibility with
your device first. Once downloaded, it is possible to use it in DEMO mode, even without
any TMATExxxAL/BL paired.
Pairing
Activate the Bluetooth communication on your device and power TMATExxxAL/BL ON.
Launch the T-Mate app.
Note: In the Android devices the localization function must be activated.
Open Setup menu ► Detecting boards, tap on "+", insert the new installation name
and insert the Code of the T-Mate. Tap on "Connect" button to pair the device.
Note: swipe a device left to remove from the list.
Setup rooms
Create new rooms accessing the
menu "Rooms" in Setup.
Tap "+" to add a room
Note: swipe a listed room left to delete it.
Adding commands to a room
Tap "+" to add remote commands.
Select the type of controlled device
from the list.
Note: swipe a listed command left to delete it.
Memorizing commands in the receivers
Once the command is added and the type is configured, it must be memorized in the receiver to be controlled
following the procedure included in the manual of the receiver.
A1234
A1234
Backside label
Tap on the icon to enter in the
room. Set the name and assign
a picture amongst the 6 provided
or select a picture of your device
gallery.
Name
Enable if the receiver
is Blue Series
Enable the timer
commands
List of available
commands
A1234
Internal label
Add to
favourites