Herunterladen Diese Seite drucken

Bell T2 Bedienungsanleitung Seite 5

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Continuous Play Mode
Will play the entire playlist or parts
of it until interrupted or ended by
STOP.
While any audio track is playing, you
may go to any other track using the
UP / DOWN Key or by entering its
numeric position. (Example: ente-
ring ‚53' will highlight the 53rd. line
/ track of the playlist.
The newly selected track will be
activated by START and interruped
by STOP.
LCD Display
Shows the selected Mode:
Single Play MODE oder Continuous
Play MODE. Simultanious display of
up to 10 audio tracks (.mp3 files)
stored on the Micro-SD card.
When more than 10 tracks are
stored, use the UP/DOWN Key for
access or select any one of them by
directly entering the matching line
number.
The selected track will be high-
lighted in the display and activated
by START.
Line 12: Track Nr., Time, Length
Line 13: MP3 Tag (title or file)
Features (Rear panel)
Micro SD Card slot
Slot to hold the micro-sd card.
Insert / take out card only while the
T2 player is switched off.
After switching on POWER, display
will show ‚Reading SD Card', follo-
wed by listing all tracks present.
Output Left / Right (Stereo)
Output (stereo) RCA type to be
connected to audio mixers, powered
mixers or any other suitable device.
Output Mono
Output (Mono) RCA type to be
connected to audio mixers, powered
mixers or any other suitable device.
Sens
Sets the output level of the internal
preamplifier. This must be done in
accordance to the input level requi-
rements of the connected mixer.
Remote (6,3mm jack socket)
Socket to connect any potential free
momentary-on switch. This will have
the function of the manual START
button on the keyboard.
Power
Power on/off switch. On will activate
the blue backlight of the diplay.
DC 18V
Connector for the external power
supply. 100-240V / 50/60Hz 0.3A
Use only the original power supply
in order to avoid hum noise, audible
interferences or severe damage of
the unit.

Werbung

loading