Inter link Cellini Montageanleitung Seite 3

EN L1SH.
1.)
Before starting, please read our assembling instructions carefully and make yourself familiar with
them.
2.) Follow our osse bling instructions corefully.
3.) Compare the Ii~ted parts and frtting list to the contents of the cardboard.
4.) Prepare the necessary tools for assembling and make sure that the tools are in proper condition.
Bad tools lead in some way to difficulties during the assembling.
5.) To moke sure that the fumiture will not be damaged
adequate area and cover the f100r with the cardboards
.6.) We recommend operating
.7.) Do not overwind screws. Check the screws from time to time and if necessary retight them.
8.) Keep the instruction and service sheets. Perhaps vou wJIIneed them later on.
For wooden fvrniture consisting of glass and steel or MDF and coated
WoodenFumiture: Stains con be taken off wlth a soft, moistened c10th or by vsing a special polish
(avoUable in supermarl<et and speciolized stores). Bvt do not forget to wipe the surface with a dry
and soft c10th ,afterwards.
Steelfurniture:
The metal has a varnished svrface. The material could show little discrepancies
stains due to the machine
If some metal parts have been twisted out of shape during transport, Vou could carefully try to twist
them into the original position. Please do not overwind the screws and retight them from time to time.
MDF and coated surfaces:
MDF consists of wooden
this could cause damage
Thot should not be a reason for complaints
Due to machine made production,
with a fine standard sand paper. Please do It carefully in order to make sure that Vou will not remove
too much of the material.
Carrying out the assembly is for adults only.Please, keepyour
Children might tak:e small parts or fittings oway or swallow them up. During assembling it could also
happen that ports of your fvmiture fall down on your children.
Pieose, therefore, protect them and make sure that you carry out the assembling in their absence.
If your piece of fumiture consists of glass, it should be handled carefully during assembling. Glass con
break at any time and cause injuries. Therefore, you should protect your eyes and hands by wearing
special c10thing and sofety shoes, available in the supermarl<ets and specialized
We are not liable for any material damage
We are also not liable for any damage
(i.e. retightening of screws, and etc •••). We are not liable forany damage
use against its purpose.
We wish Vou a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team by Inter UnI<SAS
always with two or more people .
Maintenance
made prodvction which shovld not be a reason for a complaint.
fibres. Do not work on the coated surfaces with knives or sharp objects, as
the material.
afterwards.
the MDF parts can have sharp edges. You cou Id chamferthem
Waming:
or injuries resulting from faulty assembling.
resultant trom lack of maintenanc:::e during use.
or grated during assembling, prepare an
or another soft pad (i.e. cloth or carpet) .
advice:
surface:
children away during assembling.
caused by faulty use or
3
in colour. c10uds or
stores.