Velleman VGA2HDMI Bedienungsanleitung Seite 3

 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial,
physical...) arising from the possession, use or failure of this product.
 Keep this manual for future reference.
4. Operation
Using the VGA2HDMI is very easy as it is plug-and-play.
1. Connect the VGA source signal, e.g. a DVD player, to the VGA
input. Connect the audio signal to the 3.5 mm jack.
2. Connect the HDMI
If necessary, connect the converter to an external USB power
adapter (not included) using the included cable.
5. Cleaning and Maintenance
This device does not need any particular maintenance.
Occasionally wipe with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents.
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 02/05/2016
VGA2HDMI
® output to the HDMI
3
® device.
©Velleman nv