Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONVENIENCE FUNCTIONS
Setting the date and time
Automatic setting
Your television set detects the difference in time
to Greenwich Mean Time (GMT) automatically,
as long as the channel selected transmits a time
signal.
1
Select the line »Time Adjustment« with »
then select the option »Manual« with »
>
or »
«.
– The lines »Time Zone« and »Daylight Sav-
ing« are active.
2
Select the line »Time Zone« with »
press »OK« to confirm.
– The »Select Time Zone« menu appears.
3
Select the appropriate time zone with »
>
»
«, »
« or »
V
Λ
firm.
4
Select the line »Daylight Saving« with »
<
and use »
« or »
»Off« or »On«.
MENU
5
Press »
« to finish the setting.
Manual setting
You can also set the difference in time manually
– for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
1
Select the line »Date & Time« with »
»
« and press »OK« to confirm.
Λ
2
Select the line »Auto« with »
press »OK« to confirm.
– Date and Time will be updated
automatically;
or
3
Select the input box with »
the data for Date and Time with »1...0«
and press »OK« to confirm.
32
ENGLISH
V
« and press »OK« to con-
>
« to set the option »Auto«,
« or
V
« or »
« and
V
Λ
« or »
«, enter
V
Λ
------------------------------------------------------------------------
Timer settings
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
«,
V
1
Select the line »Sleep Timer« with »
<
«
»
«.
Λ
2
Enter the switch-off time with »
Note:
« and
To switch off the function, use »
7
set the switch-off time to »Off«.
MENU
3
Press »
<
«,
Switch-on timer
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
«
V
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
1
Select the line »Auto On« with »
and press »OK« to confirm.
2
Select the line »Mode« with »
<
use »
« or »
should switch on.
3
Select the line »Input Source« with »
and use »
4
Select the line »Service Type« with »
and use »
tion (ATV, DTV, Radio or DATA).
5
Select the line »Channel« with »
and use »
channel.
Note:
The line »Channel« is only active when the in-
7
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
<
« to end the set-up.
« or »
V
>
« to select when the television
<
>
« or »
« to select the input source.
<
>
« or »
« to select the preferred op-
<
>
« or »
« to select the preferred
« or
V
>
« or »
«.
<
>
« or »
« to
« or »
«
V
Λ
« and
Λ
« or »
«
V
Λ
« or »
«
V
Λ
« or »
«
V
Λ
Werbung
Kapitel
Inhaltsverzeichnis
