Herunterladen Diese Seite drucken

Werbung

English
English
Thanks for purchasing one of our products, please read carefully the assembly
Thanks for purchasing one of our products, please read carefully the assembly
instructions before the installation (Attention: Do not tighten the screws before
instructions before the installation (Attention: Do not tighten the screws before
all screws are in place).
all screws are in place).
General Care:
-Keep your furniture out direct sunlight-Use desk pads and coasters to protect
the surface from dents,scratches,and moisture from hot or cold liquids.
Cleaning:
-For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean
lint free cotton cloth.
-Window cleaning liquid or a similar cleaning liquid can be used to clean glass surface.
A04 100309
COMPUTER TABLE
COMPUTER TABLE
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
MODEL
MODEL
MBJ-01B

Werbung

loading

Inhaltszusammenfassung für nero MBJ-01B

  • Seite 1 (Attention: Do not tighten the screws before all screws are in place). all screws are in place). MODEL MODEL MBJ-01B General Care: -Keep your furniture out direct sunlight-Use desk pads and coasters to protect the surface from dents,scratches,and moisture from hot or cold liquids. Cleaning: -For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint free cotton cloth.
  • Seite 2: Parts List

    MBJ-01B PARTS LIST PARTS LIST Right Left 3SETS...
  • Seite 3 MBJ-01B PARTS LIST PARTS LIST SCREWS LIST SCREWS LIST PART QTY. ITEM PART QTY. ITEM 3X15 MM 8X30MM 6X40 MM 6X25 MM 4X30 MM 6X35 MM 4X20 MM 6X30 MM 4X14 MM 6X12MM...
  • Seite 4 MBJ-01B 6x40mm bolt installation as below: Bolt Connecting piece Adjust connecting piece Insert bolt when direction if condition as Connecting piece under illustrated Such condition STEP A1. STEP A2. STEP A3. 2PCS 3X15 MM 2PCS 3X15 MM 4PCS 6X40 MM...
  • Seite 5 MBJ-01B Left Right 4PCS 4PCS 4X30 MM 3X15 MM ALIGN SELECTED HOLES ON SLIDES AS ILLUSTRATED WITH PRE-DRILLED HOLES ON DRAWER BOX BEFORE INSERT SCREWS 4PCS 2PCS 6X40 MM 4X20 MM 4PCS 4X30 MM...
  • Seite 6 MBJ-01B Right Left 4PCS 2PCS 3X15 MM 4X20 MM ALIGN SELECTED HOLES ON SLIDES AS ILLUSTRATED WITH PRE-DRILLED HOLES ON DRAWER BOX BEFORE INSERT SCREWS 2PCS 4X14 MM 1PCS 6X12 MM 2PCS 3X15 MM NON-LOCKING CASTER 4PCS 6X40 MM...
  • Seite 7 MBJ-01B 4PCS 4X30 MM Right Left 4PCS 2PCS 3X15 MM 4X20 MM ALIGN SELECTED HOLES ON SLIDES AS ILLUSTRATED WITH PRE-DRILLED HOLES ON DRAWER BOX BEFORE INSERT SCREWS Tighten the metal plates on the marked position 8PCS of the metal bar...
  • Seite 8 MBJ-01B Left Right 3PCS 3PCS 12PCS 3X15 MM 10PCS 6X40 MM...
  • Seite 9 MBJ-01B 4PCS 4PCS 6PCS 4PCS 6X40 MM 8X30MM Turn cabinet bottom up to install legs 2PCS 6X25 MM...
  • Seite 10 MBJ-01B P.10 8PCS 6X12 MM 8PCS 6X12 MM 1PCS 1PCS 6X35 MM...
  • Seite 11 MBJ-01B P.11 2PCS 2PCS 6X35 MM 4PCS 6X30 MM...