Axis PT IR Illuminator Kit A Installationsanleitung Seite 7

PT IR Illuminator Kit A Installation Guide
Install the Illuminators
IR light is emitted from this product (risk group 1). Use appropriate shielding or eye protection.
1. Unscrew the bottom cover screws and remove the top cover, see illustration on page 12.
2. Attach the illuminator brackets to the bottom cover using the supplied screws, lock washers and washers
(torque 4 Nm).
Apply Loctite 243  threadlocker on the screws.
3. Secure the illuminator brackets using the supplied grub screws (torque 4 Nm).
1
2
3
4
5
1 Grub screw (4x)
2 Washer (4x)
3 Lock washer (4x)
4 Illuminator bracket screw (4x)
5 Illuminator bracket (2x)
Page 7