Cleaning And Maintenance - Velleman VDPL304LF Bedienungsanleitung

240 255 Spin gobo 21
Control Channel 6 – Gobo Rotation
Value
0
Control Channel 7 – Strobe
Value
0
2
253
8. Example
Following is an example of how to program a running message like WELCOME.
First, set the writing mode: channel 1 from 154 to 204, channel 6 on 0, channel 7 from 253 to 255.
Next, follow these programming steps:
Step
1
2
3
4
5 Set channel 2 on 199, channel 3 on 37, channel 4 on 100 and channel 5 on 19.
6 Set channel 2 on 37, channel 3 on 100, channel 4 on 19 and channel 5 on 127.
7 Set channel 2 on 100, channel 3 on 19, channel 4 on 127 and channel 5 on 109.
8 Set channel 2 on 19, channel 3 on 127, channel 4 on 109 and channel 5 on 37.
9 Set channel 2 on 127, channel 3 on 109, channel 4 on 37 and channel 5 on 0.
10 Set channel 2 on 109, channel 3 on 37, channel 4 on 0 and channel 5 on 0.
11 Set channel 2 on 37, channel 3 on 0, channel 4 on 0 and channel 5 on 0.
9.

Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
19.04.2010
VDPL304LF
181
190
199
208
217
226
235
244
255
1
252
255
Set channel 4 on 199 and channel 5 on 37.
Set channel 3 on 199, channel 4 on 37 and channel 5 on 100.
189 U
198 V
207 W
216 X
225 Y
234 Z
243 Sign 1
255 Sign 2
Description
When channel 1 in modes 1, 2 or 3
Rotation with increasing speed
When channel 1 in modes 4 or 5
No function
Description
Closed
Strobe effect with increasing speed
Open
Description
Set channels 2 to 5 on 0.
Set channel 5 on 199.
7
Rev. 01
©Velleman nv