Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Check Your Powerbank Status from the LEDs:
Speaker ON/OFF LED, blinking in green while playing music.
Powerbank battery is low, less than 25% remaining.
Powerbank battery is middle, less than 50% remaining.
Powerbank battery is good, less than 75% remaining.
Powerbank battery issufficient, more than 75% remaining.
Play Music with Powerbank PLUS Music Book:
Connect Your Device with an AUX cable:
Connect Your Device Wirelessly with Bluetooth:
1. Turn on the device by pressing the ON/OFF button.
2. Turn on the "Bluetooth" on your device, and search "XLayer Speaker" in the device list.
3. Tap the "XLayer Speaker" to finish connection
XLayer Speaker
Control music with buttons on powerbank:
1. To increase the volume, press the volume up button for long.
2. To play the next song, press the volume up button shortly.
3. To decrease the volume, press the volume down button for long.
4. To play the previous song, press the volume down button shortly.
5. To pause the song, press PLAY/PAUSE button.
EN
Charge Your Powerbank:
We recommend that you fully charge the Powerbank before each use. To charge your powerbank, use
one of the following 2 charging options:
Charging with a USB Charger:
Charging with a free USB Port on a PC:
Charge Your Devices:
The powerbank is compatible with all smartphones, tablets and all USB-powered devices with 5V
charging input.
*Pull the cable from the mobile device after finishing charging.
*The Powerbank would automatically shut off in a few seconds after finishing charging.
Connect powerbank to a USB charger with a USB cable
and charge the powerbank on your outlet.
One of the capacity LEDs will blink during charging.
The LED will be OFF after powerbank is fully charged.
Connect powerbank to a free USB port on your PC with a
USB cable and charge the powerbank on your PC.
One of the capacity LEDs will blink during charging.
The LED will be OFF after powerbank is fully charged.
To charge your devices with powerbank, connect the device
to a powerbank with a USB cable. The capacity LED will light,
and powerbank will charge the devices automatically.
(Press the speaker ON/OFF button to activate charging if it
doesn't start automatically.)
EN
Werbung
Inhaltsverzeichnis
