Schneider Airsystems KTP 310 ALU Original Bedienungsanleitung Seite 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
1.4 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Air regulation
Cartridge, puppet size
Cartridge support (diameter)
Cartridge type
Puppet type with maximum diameter of 50 mm
Recommended hose diameter (inner) at L= 10 m
Overall dimensions: width x depth x height
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
03 Air regulation
04 Cartridge housing
05 Union nut
06 Union nut
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
1.2 Scope of delivery
3
– Cartridge gun
3
– Instruction manual
3
3
1.3 Conventional use
3
The compressed air-operated Cartridge gun
4
is suitable for sealing joints; for example in
glass, ceramics, wood, metal,
masonry and plumbing with
commercially available:
• plastic cartridges,
• Aluminium cartridges and
• silicone puppets
with volume of 310 ml.
Any other type of use is considered contrary
to the intended use.
08 Telescope piston
09 Attachment for silicon puppets
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
KTP 310 ALU
100 l/min
8 bar
1-8 bar
Continuous
≤ 310 ml
50,3 mm
Plastic cartridge, alumin-
ium cartridge
e.g. silicon puppet
6 mm
315 x 70 x 215 mm
0,9 kg
GB
I/ 3