Low Battery; Troubleshooting - CAPPEC NS-WSTB01 Bedienungsanleitung

5.LOW BATTERY:

When the sensor is running low on battery, the LED light indication will flash red.
The actual status of the battery can also be viewed in the application on your smart
device.

TROUBLESHOOTING:

My device will not connect with sensorblue!
- Make sure you device is BLE compatible and has iOS 6+ or Android 4.3 installed.
- Make sure your Bluetooth connection is turned on, on your smart device.
- Smart device and Sensorblue has to be within 10 meter of each other.
My device was connected but can't reconnect.
- Make sure Sensorblue has sufficient battery power and both the LCD and LED light is
on and flashing.
- Make sure your Bluetooth connection is turned on, on your smart device.
- Smart device and Sensorblue has to be within 10 meter of each other.
- If connection is not possible, remove battery cover and press the reset button (6)
- Sensorblue will now return to pairing mode, and you need follow step 2.
I think Sensorblue is not measuring correct
- In order for sensor blue to measure the actual room / area's temperature and
humidity, make sure the sensor is free from any obstacles and hanging freely with it's