Letscom D39 Bedienungsanleitung Seite 15

● When the earbuds are on but not paired with your phone or
other Bluetooth devices, they will exit the pairing mode and
be automatically off in 10 minutes.
■
Pair ONE earbud (Mono Use)
You can use both earbuds simultaneously or use either of the
two earbuds alone.
1) Make sure the earbud and your phone or other Bluetooth
devices are next to each other (within 3 feet, no obstacles
between)
2) Turn on the Bluetooth of your phone or other Bluetooth
devices.
3) Take the earbud out of the charging case.
4) Turn off the earbud by pressing and holding the MFB
button for 4 seconds.
5) Press and hold the MFB button on the earbud until the
indicator flashes blue and white alternately and earbud
enters pairing mode.
6) In the list of found Bluetooth devices in your phone or other
Bluetooth devices, choose "D39-L" if you use the left
earbud or "D39-R" if you use the right earbud to pair.
Note:
When the left/right earbud is connected to your phone and
you take the other earbud out of the charging case, earbuds
will pair with each other and then link back to your phone
automatically (in the condition that you have paired both
earbuds with your phone before) .
13