Seite 1
IMBA-Q170-i2 ATX Motherboard MODEL: IMBA-Q170-i2 ATX Motherboard Supports 6th Generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® CPU, Intel® Q170 Chipset, DDR4, HDMI 2.0, DVI-D, VGA, Dual Intel® PCIe GbE, SATA 6Gb/s, USB 3.0, HD Audio, IPMI 2.0 and RoHS...
Seite 1
IMBA-Q170-i2 ATX Motherboard MODEL: IMBA-Q170-i2 ATX Motherboard Supports 6th Generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® CPU, Intel® Q170 Chipset, DDR4, HDMI 2.0, DVI-D, VGA, Dual Intel® PCIe GbE, SATA 6Gb/s, USB 3.0, HD Audio, IPMI 2.0 and RoHS...
Seite 2
IMBA-Q170-i2 ATX Motherboard Revision Date Version Changes 1.01 Modified the display output spec of the DVI-D, HDMI and October 24, 2016 iDP connectors (page 7) 1.00 Initial release May 24, 2016 Page ii...
Seite 2
IMBA-Q170-i2 ATX Motherboard Revision Date Version Changes 1.01 Modified the display output spec of the DVI-D, HDMI and October 24, 2016 iDP connectors (page 7) 1.00 Initial release May 24, 2016 Page ii...
Seite 3
IMBA-Q170-i2 ATX Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Seite 3
IMBA-Q170-i2 ATX Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IMBA-Q170-i2 ATX Motherboard Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
IMBA-Q170-i2 ATX Motherboard Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
Seite 5
PTIONAL TEMS 3 CONNECTORS ......................16 3.1 P ..............17 ERIPHERAL NTERFACE ONNECTORS 3.1.1 IMBA-Q170-i2 Layout ..................17 3.1.2 Peripheral Interface Connectors ..............18 3.1.3 External Interface Panel Connectors............... 19 3.2 I ..............20 NTERNAL ERIPHERAL ONNECTORS 3.2.1 +12V ATX Power Connector ................20 3.2.2 Additional Power Connector ................
Seite 5
PTIONAL TEMS 3 CONNECTORS ......................16 3.1 P ..............17 ERIPHERAL NTERFACE ONNECTORS 3.1.1 IMBA-Q170-i2 Layout ..................17 3.1.2 Peripheral Interface Connectors ..............18 3.1.3 External Interface Panel Connectors............... 19 3.2 I ..............20 NTERNAL ERIPHERAL ONNECTORS 3.2.1 +12V ATX Power Connector ................20 3.2.2 Additional Power Connector ................
Seite 6
IMBA-Q170-i2 ATX Motherboard 3.2.11 Front Panel Audio Connector ................ 30 3.2.12 Front Panel Connector .................. 31 3.2.13 I C Connector ....................32 3.2.14 Internal DisplayPort Connector ..............33 3.2.15 iRIS Module Slot .................... 34 3.2.16 Keyboard and Mouse Connector ..............35 3.2.17 LAN LED Connectors ..................
Seite 6
IMBA-Q170-i2 ATX Motherboard 3.2.11 Front Panel Audio Connector ................ 30 3.2.12 Front Panel Connector .................. 31 3.2.13 I C Connector ....................32 3.2.14 Internal DisplayPort Connector ..............33 3.2.15 iRIS Module Slot .................... 34 3.2.16 Keyboard and Mouse Connector ..............35 3.2.17 LAN LED Connectors ..................
Seite 7
ROCEDURE 4.15 IPMI S ..................85 ETUP ROCEDURE 4.15.1 Managed System Hardware Setup ..............85 4.15.2 Using the IEI iMAN Web GUI................ 85 5 BIOS ..........................88 5.1 I ......................89 NTRODUCTION 5.1.1 Starting Setup....................89 5.1.2 Using Setup ...................... 89 5.1.3 Getting Help.....................
Seite 7
ROCEDURE 4.15 IPMI S ..................85 ETUP ROCEDURE 4.15.1 Managed System Hardware Setup ..............85 4.15.2 Using the IEI iMAN Web GUI................ 85 5 BIOS ..........................88 5.1 I ......................89 NTRODUCTION 5.1.1 Starting Setup....................89 5.1.2 Using Setup ...................... 89 5.1.3 Getting Help.....................
Seite 8
IMBA-Q170-i2 ATX Motherboard 5.3.4.2 Serial Port 1 Configuration ............... 98 5.3.4.3 Serial Port 2 Configuration ............... 99 5.3.4.4 Serial Port 3 Configuration ..............100 5.3.4.5 Parallel Port Configuration ..............104 5.3.5 iWDD H/W Monitor ..................106 5.3.5.1 Smart Fan Mode Configuration .............. 107 5.3.6 RTC Wake Settings ..................
Seite 8
IMBA-Q170-i2 ATX Motherboard 5.3.4.2 Serial Port 1 Configuration ............... 98 5.3.4.3 Serial Port 2 Configuration ............... 99 5.3.4.4 Serial Port 3 Configuration ..............100 5.3.4.5 Parallel Port Configuration ..............104 5.3.5 iWDD H/W Monitor ..................106 5.3.5.1 Smart Fan Mode Configuration .............. 107 5.3.6 RTC Wake Settings ..................
Seite 9
IMBA-Q170-i2 ATX Motherboard C BIOS OPTIONS ......................146 D TERMINOLOGY ..................... 150 E DIGITAL I/O INTERFACE ..................154 E.1 I ...................... 155 NTRODUCTION E.2 A 1 ................156 SSEMBLY ANGUAGE AMPLE E.3 A 2 ................156 SSEMBLY ANGUAGE AMPLE F WATCHDOG TIMER ....................157 G INTEL®...
Seite 9
IMBA-Q170-i2 ATX Motherboard C BIOS OPTIONS ......................146 D TERMINOLOGY ..................... 150 E DIGITAL I/O INTERFACE ..................154 E.1 I ...................... 155 NTRODUCTION E.2 A 1 ................156 SSEMBLY ANGUAGE AMPLE E.3 A 2 ................156 SSEMBLY ANGUAGE AMPLE F WATCHDOG TIMER ....................157 G INTEL®...
IMBA-Q170-i2 ATX Motherboard List of Figures Figure 1-1: IMBA-Q170-i2.......................2 Figure 1-2: Connectors ........................4 Figure 1-3: IMBA-Q170-i2 Dimensions (mm) ................5 Figure 1-4: Data Flow Diagram......................6 Figure 3-1: Peripheral Interface Connectors ................17 Figure 3-2: +12V ATX Power Connector Pinout Location ............20 Figure 3-3: Additional Power Connector Location..............21 Figure 3-4: ATX Power Connector Location ................22...
Seite 11
Figure 4-20: mSATA Setup Jumper Location ................79 Figure 4-21: SATA Drive Cable Connection................81 Figure 4-22: SATA Power Drive Connection................82 Figure 4-23: Windows 7 USB 3.0 Creator Utility................83 Figure 4-24: Update Process is Complete .................84 Figure 4-25: IEI iMAN Web Address....................86 Page xi...
Seite 11
Figure 4-20: mSATA Setup Jumper Location ................79 Figure 4-21: SATA Drive Cable Connection................81 Figure 4-22: SATA Power Drive Connection................82 Figure 4-23: Windows 7 USB 3.0 Creator Utility................83 Figure 4-24: Update Process is Complete .................84 Figure 4-25: IEI iMAN Web Address....................86 Page xi...
Seite 12
IMBA-Q170-i2 ATX Motherboard Figure 4-26: IEI iMAN Web GUI....................87 Figure 6-1: Introduction Screen ....................141 Figure 6-2: Available Drivers ....................141 Page xii...
Seite 12
IMBA-Q170-i2 ATX Motherboard Figure 4-26: IEI iMAN Web GUI....................87 Figure 6-1: Introduction Screen ....................141 Figure 6-2: Available Drivers ....................141 Page xii...
Seite 13
IMBA-Q170-i2 ATX Motherboard List of Tables Table 1-1: IMBA-Q170-i2 Specifications ..................9 Table 2-1: Packing List.........................13 Table 2-2: Optional Items......................15 Table 3-1: Peripheral Interface Connectors ................19 Table 3-2: Rear Panel Connectors ....................20 Table 3-3: +12V ATX Power Connector Pinouts ................20 Table 3-4: Additional Power Connector Pinouts ...............21 Table 3-5: ATX Power Connector Pinouts .................22...
Seite 13
IMBA-Q170-i2 ATX Motherboard List of Tables Table 1-1: IMBA-Q170-i2 Specifications ..................9 Table 2-1: Packing List.........................13 Table 2-2: Optional Items......................15 Table 3-1: Peripheral Interface Connectors ................19 Table 3-2: Rear Panel Connectors ....................20 Table 3-3: +12V ATX Power Connector Pinouts ................20 Table 3-4: Additional Power Connector Pinouts ...............21 Table 3-5: ATX Power Connector Pinouts .................22...
Seite 14
IMBA-Q170-i2 ATX Motherboard Table 3-28: TPM Connector Pinouts ...................49 Table 3-29: USB 2.0 Connector Pinouts ..................50 Table 3-30: USB 3.0 Connector Pinouts ..................51 Table 3-31: USB 3.0 Port Pinouts....................53 Table 3-32: LAN Pinouts ......................54 Table 3-33: HDMI Connector Pinouts ..................54 Table 3-34: USB 2.0 Port Pinouts....................55...
Seite 14
IMBA-Q170-i2 ATX Motherboard Table 3-28: TPM Connector Pinouts ...................49 Table 3-29: USB 2.0 Connector Pinouts ..................50 Table 3-30: USB 3.0 Connector Pinouts ..................51 Table 3-31: USB 3.0 Port Pinouts....................53 Table 3-32: LAN Pinouts ......................54 Table 3-33: HDMI Connector Pinouts ..................54 Table 3-34: USB 2.0 Port Pinouts....................55...
Seite 15
BIOS Menu 15: SATA Configuration ..................116 BIOS Menu 16: NVMe Configuration..................117 BIOS Menu 17: USB Configuration ..................118 BIOS Menu 18: iEi Feature......................119 BIOS Menu 19: Chipset ......................120 BIOS Menu 20: System Agent (SA) Configuration ..............121 BIOS Menu 21: Graphics Configuration ..................
Seite 15
BIOS Menu 15: SATA Configuration ..................116 BIOS Menu 16: NVMe Configuration..................117 BIOS Menu 17: USB Configuration ..................118 BIOS Menu 18: iEi Feature......................119 BIOS Menu 19: Chipset ......................120 BIOS Menu 20: System Agent (SA) Configuration ..............121 BIOS Menu 21: Graphics Configuration ..................
Seite 16
IMBA-Q170-i2 ATX Motherboard BIOS Menu 31: Save & Exit....................... 134 BIOS Menu 32: Server Mgmt ....................135 BIOS Menu 33: System Event Log ................... 135 BIOS Menu 34: System Event Log ................... 137 Page xvi...
Seite 16
IMBA-Q170-i2 ATX Motherboard BIOS Menu 31: Save & Exit....................... 134 BIOS Menu 32: Server Mgmt ....................135 BIOS Menu 33: System Event Log ................... 135 BIOS Menu 34: System Event Log ................... 137 Page xvi...
Seite 17
IMBA-Q170-i2 ATX Motherboard Chapter Introduction Page 1...
Seite 17
IMBA-Q170-i2 ATX Motherboard Chapter Introduction Page 1...
1.1 Introduction Figure 1-1: IMBA-Q170-i2 The IMBA-Q170-i2 is an ATX motherboard. It accepts a Socket LGA1151 Intel® Core i7/i5/i3, Pentium® or Celeron® processor and supports four 288-pin 2133 MHz dual-channel DDR4 DIMM modules up to 64 GB. The integrated Intel® Q170 chipset supports six SATA 6Gb/s drives.
1.1 Introduction Figure 1-1: IMBA-Q170-i2 The IMBA-Q170-i2 is an ATX motherboard. It accepts a Socket LGA1151 Intel® Core i7/i5/i3, Pentium® or Celeron® processor and supports four 288-pin 2133 MHz dual-channel DDR4 DIMM modules up to 64 GB. The integrated Intel® Q170 chipset supports six SATA 6Gb/s drives.
Seite 19
IMBA-Q170-i2 ATX Motherboard 1.2 Features Some of the IMBA-Q170-i2 motherboard features are listed below: ATX form factor 6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor supported Intel® Q170 chipset Four 288-pin 2133 MHz dual-channel DDR4 DIMMs support up to 64 GB Two Intel®...
Seite 19
IMBA-Q170-i2 ATX Motherboard 1.2 Features Some of the IMBA-Q170-i2 motherboard features are listed below: ATX form factor 6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor supported Intel® Q170 chipset Four 288-pin 2133 MHz dual-channel DDR4 DIMMs support up to 64 GB Two Intel®...
IMBA-Q170-i2 ATX Motherboard 1.4 Dimensions The main dimensions of the IMBA-Q170-i2 are shown in the diagram below. Figure 1-3: IMBA-Q170-i2 Dimensions (mm) Page 5...
IMBA-Q170-i2 ATX Motherboard 1.4 Dimensions The main dimensions of the IMBA-Q170-i2 are shown in the diagram below. Figure 1-3: IMBA-Q170-i2 Dimensions (mm) Page 5...
IMBA-Q170-i2 ATX Motherboard 1.5 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 6...
IMBA-Q170-i2 ATX Motherboard 1.5 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 6...
IMBA-Q170-i2 ATX Motherboard 1.6 Technical Specifications The IMBA-Q170-i2 technical specifications are listed below. Specification/Model IMBA-Q170-i2 Form Factor 6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or CPU Supported Celeron® CPU Chipset Intel® Q170 Four 288-pin 2133 MHz dual-channel unbuffered DDR4 Memory SDRAM DIMMs supported (system max.
Seite 24
IMBA-Q170-i2 ATX Motherboard One full-size/half-size PCIe Mini card slot (supports mSATA, co-lay SATA port 6) Two PCI slots Expansions Two PCIe x8 slots (Gen3) Three PCIe x4 slots (Gen3) I/O Interface Connectors Line-in, line-out and mic-in audio jacks on rear panel...
Seite 24
IMBA-Q170-i2 ATX Motherboard One full-size/half-size PCIe Mini card slot (supports mSATA, co-lay SATA port 6) Two PCI slots Expansions Two PCIe x8 slots (Gen3) Three PCIe x4 slots (Gen3) I/O Interface Connectors Line-in, line-out and mic-in audio jacks on rear panel...
Intel® Core i7-6700K CPU with four 4 GB 2133 MHz DDR4 Power Consumption memory) Operating -20ºC ~ 60ºC Temperature Storage -30ºC ~ 70ºC Temperature Operating Humidity 5% ~ 95% (non-condensing) Physical Specifications Dimensions 244 mm x 305 mm Weight (GW/NW) 1200 g/700 g Table 1-1: IMBA-Q170-i2 Specifications Page 9...
Intel® Core i7-6700K CPU with four 4 GB 2133 MHz DDR4 Power Consumption memory) Operating -20ºC ~ 60ºC Temperature Storage -30ºC ~ 70ºC Temperature Operating Humidity 5% ~ 95% (non-condensing) Physical Specifications Dimensions 244 mm x 305 mm Weight (GW/NW) 1200 g/700 g Table 1-1: IMBA-Q170-i2 Specifications Page 9...
Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the IMBA-Q170-i2 is unpacked, please do the following: Follow the anti-static guidelines above. Make sure the packing box is facing upwards when opening.
Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the IMBA-Q170-i2 is unpacked, please do the following: Follow the anti-static guidelines above. Make sure the packing box is facing upwards when opening.
Seite 28
NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMBA-Q170-i2 was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.
Seite 28
NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMBA-Q170-i2 was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.
IMBA-Q170-i2 ATX Motherboard Quantity Item and Part Number Image Quick installation guide Table 2-1: Packing List 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image iRIS-2400 module, IPMI 2.0 adapter card with AST2400...
IMBA-Q170-i2 ATX Motherboard Quantity Item and Part Number Image Quick installation guide Table 2-1: Packing List 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image iRIS-2400 module, IPMI 2.0 adapter card with AST2400...
Seite 30
IMBA-Q170-i2 ATX Motherboard Item and Part Number Image PS/2 KB/MS Y-cable with bracket (P/N: 19800-000075-RS) Dual-port USB cable with bracket (P/N: 19800-003100-300-RS) USB 3.0 cable with bracket, 457 mm (P/N: 19800-010500-200-RS) SATA power cable (P/N: 32102-000100-200-RS) Serial port cable, P=2.54, 230 mm...
Seite 30
IMBA-Q170-i2 ATX Motherboard Item and Part Number Image PS/2 KB/MS Y-cable with bracket (P/N: 19800-000075-RS) Dual-port USB cable with bracket (P/N: 19800-003100-300-RS) USB 3.0 cable with bracket, 457 mm (P/N: 19800-010500-200-RS) SATA power cable (P/N: 32102-000100-200-RS) Serial port cable, P=2.54, 230 mm...
IMBA-Q170-i2 ATX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the peripheral interface connectors. 3.1.1 IMBA-Q170-i2 Layout The figures below show all the peripheral interface connectors. Figure 3-1: Peripheral Interface Connectors Page 17...
IMBA-Q170-i2 ATX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the peripheral interface connectors. 3.1.1 IMBA-Q170-i2 Layout The figures below show all the peripheral interface connectors. Figure 3-1: Peripheral Interface Connectors Page 17...
Seite 34
IMBA-Q170-i2 ATX Motherboard 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board. Connector Type Label 4-pin Molex power +12V ATX power connector CPU12V1 connector Additional power connector 4-pin connector ATXPWR1 ATX power connector 24-pin connector...
Seite 34
IMBA-Q170-i2 ATX Motherboard 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board. Connector Type Label 4-pin Molex power +12V ATX power connector CPU12V1 connector Additional power connector 4-pin connector ATXPWR1 ATX power connector 24-pin connector...
IMBA-Q170-i2 ATX Motherboard 3.2.2 Additional Power Connector CN Label: ATXPWR1 4-pin connector, p=5.08 mm CN Type: CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 The additional power connector provides extra +12V and +5V power to the system. Figure 3-3: Additional Power Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.2 Additional Power Connector CN Label: ATXPWR1 4-pin connector, p=5.08 mm CN Type: CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 The additional power connector provides extra +12V and +5V power to the system. Figure 3-3: Additional Power Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.4 Battery Connector CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. CN Label: BAT1 CN Type:...
IMBA-Q170-i2 ATX Motherboard 3.2.4 Battery Connector CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. CN Label: BAT1 CN Type:...
IMBA-Q170-i2 ATX Motherboard 3.2.5 Chassis Intrusion Connector CN Label: CHASSIS1 2-pin header, p=2.54 mm CN Type: CN Location: F igure 3-6 CN Pinouts: See Table 3-6 The chassis intrusion connector is for a chassis intrusion detection sensor or switch that detects if a chassis component is removed or replaced.
IMBA-Q170-i2 ATX Motherboard 3.2.5 Chassis Intrusion Connector CN Label: CHASSIS1 2-pin header, p=2.54 mm CN Type: CN Location: F igure 3-6 CN Pinouts: See Table 3-6 The chassis intrusion connector is for a chassis intrusion detection sensor or switch that detects if a chassis component is removed or replaced.
IMBA-Q170-i2 ATX Motherboard 3.2.7 Digital I/O Connector CN Label: DIO1 10-pin header, p=2 mm CN Type: CN Location: See Figure 3-8 CN Pinouts: See Table 3-7 The digital I/O connector provides programmable input and output for external devices. Figure 3-8: Digital I/O Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.7 Digital I/O Connector CN Label: DIO1 10-pin header, p=2 mm CN Type: CN Location: See Figure 3-8 CN Pinouts: See Table 3-7 The digital I/O connector provides programmable input and output for external devices. Figure 3-8: Digital I/O Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.9 Fan Connector (CPU) CN Label: CPU_FAN1 4-pin wafer, p=2.54 mm CN Type: CN Location: See Figure 3-10 CN Pinouts: See Table 3-9 The fan connector attaches to a CPU cooling fan. Figure 3-10: CPU Fan Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.9 Fan Connector (CPU) CN Label: CPU_FAN1 4-pin wafer, p=2.54 mm CN Type: CN Location: See Figure 3-10 CN Pinouts: See Table 3-9 The fan connector attaches to a CPU cooling fan. Figure 3-10: CPU Fan Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.10 Fan Connectors (System) CN Label: SYS_FAN1, SYS_FAN2 3-pin wafer, p=2.54 mm CN Type: CN Location: See Figure 3-11 CN Pinouts: See Table 3-10 and Table 3-11 Each fan connector attaches to a system cooling fan. The SYS_FAN1 provides smart fan function.
IMBA-Q170-i2 ATX Motherboard 3.2.10 Fan Connectors (System) CN Label: SYS_FAN1, SYS_FAN2 3-pin wafer, p=2.54 mm CN Type: CN Location: See Figure 3-11 CN Pinouts: See Table 3-10 and Table 3-11 Each fan connector attaches to a system cooling fan. The SYS_FAN1 provides smart fan function.
IMBA-Q170-i2 ATX Motherboard 3.2.11 Front Panel Audio Connector CN Label: FRONT-PANEL1 10-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-12 CN Pinouts: See Table 3-12 This connector connects to speakers, a microphone and an audio input. Figure 3-12: Front Panel Audio Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.11 Front Panel Audio Connector CN Label: FRONT-PANEL1 10-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-12 CN Pinouts: See Table 3-12 This connector connects to speakers, a microphone and an audio input. Figure 3-12: Front Panel Audio Connector Location...
IMBA-Q170-i2 ATX Motherboard 3.2.12 Front Panel Connector CN Label: F_PANEL1 14-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-13 CN Pinouts: See Table 3-13 The front panel connector connects to the indicator LEDs and buttons on the computer's front panel.
Seite 48
IMBA-Q170-i2 ATX Motherboard 3.2.13 I C Connector CN Label: I2C1 4-pin wafer, p=1.25 mm CN Type: CN Location: See Figure 3-14 CN Pinouts: See Table 3-14 The I C connector is used to connect I C-bus devices to the mainboard.
Seite 49
IMBA-Q170-i2 ATX Motherboard 3.2.14 Internal DisplayPort Connector CN Label: 20-pin box header, p=2 mm CN Type: CN Location: See Figure 3-15 CN Pinouts: See Table 3-15 The DisplayPort connector supports HDMI, LVDS, VGA, DVI and DisplayPort graphics interfaces. Figure 3-15: Internal DisplayPort Connector Location...
Seite 50
The iRIS module slot allows installation of the iRIS-2400 module. Figure 3-16: iRIS Module Slot Location WARNING: The iRIS module slot is designed to install the iRIS-2400 module only. DO NOT install other modules into the iRIS module slot. Doing so may cause damage to the IMBA-Q170-i2. Page 34...
IMBA-Q170-i2 ATX Motherboard 3.2.16 Keyboard and Mouse Connector CN Label: KB_MS1 6-pin wafer, p=2 mm CN Type: CN Location: See Figure 3-17 CN Pinouts: See Table 3-16 The keyboard and mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse.
Seite 52
IMBA-Q170-i2 ATX Motherboard 3.2.17 LAN LED Connectors CN Label: LED_LAN1, LED_LAN2 2-pin header, p=2.54 mm CN Type: CN Location: F igure 3-18 CN Pinouts: T able 3-17 and Table 3-18 The LAN LED connectors are used to connect to the LAN LED indicators on the chassis to indicate users the link activities of the two LAN ports.
IMBA-Q170-i2 ATX Motherboard 3.2.18 Parallel Port Connector CN Label: LPT1 CN Type: 26-pin box header, p=2.54 mm CN Location: See Figure 3-19 CN Pinouts: See Table 3-19 The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer.
IMBA-Q170-i2 ATX Motherboard SIO_PE SIO_SLCT Table 3-19: Parallel Port Connector Pinouts 3.2.19 PCI Slots CN Label: PCI1, PCI2 CN Type: PCI Slot CN Location: See Figure 3-20 The PCI slot enables a PCI expansion module to be connected to the board.
Seite 55
IMBA-Q170-i2 ATX Motherboard The PCIe x4 expansion card slots are for PCIe x4 expansion cards. Figure 3-21: PCIe x4 Slot Locations 3.2.21 PCIe x8 Slots CN Label: PCIEX8_1, PCIEX8_2 CN Type: PCIe x8 slot CN Location: See Figure 3-22 The PCIe x8 expansion card slots are for PCIe x8 expansion cards.
Seite 56
IMBA-Q170-i2 ATX Motherboard 3.2.22 PCIe Mini Slot CN Label: MPCIE1 PCIe Mini slot CN Type: CN Location: F igure 3-23 CN Pinouts: See Table 3-20 The PCIe Mini slot is for installing a full-size/half-size PCIe Mini expansion card, including an mSATA card.
Seite 58
IMBA-Q170-i2 ATX Motherboard Figure 3-24: Power Button Location 3.2.24 SATA 6Gb/s Drive Connector CN Label: S_ATA1, S_ATA2, S_ATA3, S_ATA4, S_ATA5, S_ATA6 CN Type: 7-pin SATA drive connector CN Location: See Figure 3-25 CN Pinouts: See Table 3-21 The SATA drive connectors can be connected to SATA drives and support up to 6Gb/s data transfer rate.
Seite 59
IMBA-Q170-i2 ATX Motherboard Figure 3-25: SATA 6Gb/s Drive Connector Locations Description SATA_TX+ SATA_TX- SATA_RX- SATA RX+ Table 3-21: SATA 6Gb/s Drive Connector Pinouts 3.2.25 Serial Port Connectors, RS-232 CN Label: COM1,COM2,COM3,COM4 10-pin box header, p=2.54 mm CN Type: CN Location:...
Seite 60
IMBA-Q170-i2 ATX Motherboard Figure 3-26: RS-232 Serial Port Connector Location Description Description Table 3-22: RS-232 Serial Port Connector Pinouts 3.2.26 Serial Port Connectors, RS-232/422/485 CN Label: COM5, COM6 CN Type: 10-pin box header, p=2.54 mm CN Location: See Figure 3-27...
Seite 61
IMBA-Q170-i2 ATX Motherboard NOTE: The communication protocol of the serial ports is set through the BIOS menu in “Advanced Super IO Configuration Serial Port 5/6 Configuration”. Use the Transfer Mode BIOS option to configure the correspondent serial ports (refer to Sections 5.3.4.4.2 and 5.3.4.4.3 for detailed information).
Seite 62
IMBA-Q170-i2 ATX Motherboard 3.2.27 SMBus Connector CN Label: SMB1 4-pin wafer, p=1.25 mm CN Type: CN Location: See Figure 3-28 CN Pinouts: See Table 3-25 The SMBus (System Management Bus) connector provides low-speed system management communications. Figure 3-28: SMBus Connector Location...
Seite 63
IMBA-Q170-i2 ATX Motherboard 3.2.28 SPI Flash Connector CN Label: JSPI1 8-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-29 CN Pinouts: See Table 3-26 The SPI flash connector is used to flash the SPI ROM. Figure 3-29: SPI Flash Connector Location...
Seite 64
IMBA-Q170-i2 ATX Motherboard 3.2.29 SPI Flash Connector, EC CN Label: JSPI2 8-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-30 CN Pinouts: See Table 3-27 The SPI flash connector is used to flash the EC ROM. Figure 3-30: SPI EC Flash Connector Location...
Seite 65
IMBA-Q170-i2 ATX Motherboard 3.2.30 TPM Connector CN Label: TPM1 20-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-31 CN Pinouts: See Table 3-28 The TPM connector connects to a TPM module. Figure 3-31: TPM Connector Location Description Description...
Seite 66
IMBA-Q170-i2 ATX Motherboard 3.2.31 USB 2.0 Connectors CN Label: USB1, USB2 8-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-32 CN Pinouts: See Table 3-29 The USB 2.0 connectors connect to USB 2.0 devices. Each pin header provides two USB 2.0 ports.
Seite 67
IMBA-Q170-i2 ATX Motherboard 3.2.32 USB 3.0 Connector CN Label: USB3-1 19-pin box header, p=2 mm CN Type: CN Location: See Figure 3-33 CN Pinouts: See Table 3-30 The USB 3.0 connector connects to USB 3.0 devices. This connector provides two USB 3.0 ports.
Seite 68
IMBA-Q170-i2 ATX Motherboard 3.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: Figure 3-34: External Peripheral Interface Connector 3.3.1 Audio Connector CN Label: AUDIO_CV1 Audio jack...
Seite 69
CN Label: LAN1_USB1, LAN2_USB2 RJ-45, USB 3.0 CN Type: CN Location: See Figure 3-34 CN Pinouts: See Table 3-31 and Table 3-32 There are four external USB 3.0 connectors on the IMBA-Q170-i2. Description Description USB_DATA- USB_DATA- USB_DATA+ USB_ DATA+ USB3_RX-...
Seite 70
IMBA-Q170-i2 ATX Motherboard Each LAN connector connects to a local network Description Description LAN1_MDI0P LAN1_MDI2P LAN1_MDI0N LAN1_MDI2N LAN1_MDI1P LAN1_MDI3P LAN1_MDI1N LAN1_MDI3N Table 3-32: LAN Pinouts 3.3.3 HDMI Connector CN Label: HDMI1 HDMI 2.0 connector CN Type: CN Location: See Figure 3-34...
Seite 71
IMBA-Q170-i2 ATX Motherboard 3.3.4 Keyboard/Mouse and USB 2.0 Connectors CN Label: K/M_USB1 PS/2, USB 2.0 CN Type: CN Location: See Figure 3-34 CN Pinouts: See Table 3-34 and Table 3-35 The USB 2.0 connector can be connected to a USB 2.0/1.1 device.
Seite 72
IMBA-Q170-i2 ATX Motherboard 3.3.5 VGA and DVI-D Connectors CN Label: VIDEO1 15-pin VGA and 24-pin DVI-D CN Type: CN Location: See Figure 3-34 CN Pinouts: See Table 3-36 and Table 3-37 The DVI connector connects to a monitor that supports DVI video input.
Seite 73
IMBA-Q170-i2 ATX Motherboard Description Description GREEN BLUE HOT PLUG DETECT DDCDA HSYNC VSYNC DDCCLK Table 3-37: VGA Connector Pinouts Figure 3-36: VGA Connector Page 57...
Seite 74
IMBA-Q170-i2 ATX Motherboard Chapter Installation Page 58...
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMBA-Q170-i2. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IMBA-Q170-i2 or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
Seite 76
This helps to prevent potential ESD damage. Turn all power to the IMBA-Q170-i2 off: When working with the IMBA-Q170-i2, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system.
Seite 77
IMBA-Q170-i2 ATX Motherboard 4.3 Socket LGA1151 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed.
Seite 78
IMBA-Q170-i2 ATX Motherboard Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air.
Seite 79
IMBA-Q170-i2 ATX Motherboard Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly. See Figure 4-3. Figure 4-3: Insert the Socket LGA1151 CPU Step 8: Close the CPU socket.
Seite 80
ONLY compatible with captive screw type cooling fans. The cooling kit can be bought from IEI. The cooling kit has a heat sink and fan. WARNING: Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal paste on the bottom of the heat sink.
Seite 81
Do not overtighten the screws. Step 5: Connect the fan cable. Connect the cooling kit fan cable to the CPU fan connector on the IMBA-Q170-i2. Carefully route the cable and avoid heat generating chips and fan blades.Step 0:...
IMBA-Q170-i2 ATX Motherboard 4.5 DIMM Installation To install a DIMM, please follow the steps below and refer to Figure 4-6. Figure 4-6: DIMM Installation Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they can. See Figure 4-6.
Seite 83
The iRIS module slot is designed to install the iRIS-2400 module only. DO NOT install other modules into the iRIS module slot. Doing so may cause damage to the IMBA-Q170-i2. To install the iRIS-2400 module, please follow the steps below and refer to Figure 4-7.
Seite 84
IMBA-Q170-i2 ATX Motherboard Step 5: Removing the iRIS-2400 module. To remove the iRIS-2400 module, push both handles outward. The module is ejected by a mechanism in the socket.Step 0: NOTE: After installing the iRIS-2400 module, use LAN2_USB2 port to establish a network connection. Please refer to Section 4.15 for IPMI setup procedures.
Seite 85
IMBA-Q170-i2 ATX Motherboard Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card into the socket at an angle of about 20º (Figure 4-9).
Seite 86
IMBA-Q170-i2 ATX Motherboard 4.8 Half-size PCIe Mini Card Installation The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card. To install a half-size PCIe Mini card, please follow the steps below. Step 1: Locate the PCIe Mini card slot. See Chapter 3.
Seite 87
Figure 4-13: Securing the Half-size PCIe Mini Card 4.9 USB 3.0 Expansion Card Installation IEI provides an optional USB 3.0 expansion card that allows four additional USB 3.0/2.0 devices to be connected to the motherboard. To install the expansion card, please follow the steps below.
Seite 88
Step 0: 4.10 PCIe Mini and mSATA Expansion Card Installation IEI provides an optional PCIe Mini and mSATA expansion card that allows additional PCIe Mini and mSATA cards to be installed to the motherboard. To install the expansion card, please follow the steps below.
Seite 89
PCIe edge connector on the bottom of the expansion card to the PCIEX4_3 slot (Figure 4-15) on the IMBA-Q170-i2. Then, push down gently on the expansion card to make sure it is firmly inserted into the PCIEX4_3 slot.
IMBA-Q170-i2 ATX Motherboard 4.11 System Configuration The system configuration is controlled by jumpers, buttons, switches and BIOS options. The system configuration must be performed before installation. 4.11.1 AT/ATX Power Mode Setting The AT and ATX power mode selection is made through the AT/ATX power mode switch which is shown in Figure 4-16.
Seite 91
IMBA-Q170-i2 ATX Motherboard 4.11.2 Clearing CMOS To reset the BIOS, remove the on-board battery and press the J_CMOS1 button for three seconds or more. In addition, the J_CMOS2 header provides an additional clear CMOS button that can be connected to the chassis, allowing users to clear CMOS without opening the system chassis.
Seite 92
IMBA-Q170-i2 ATX Motherboard 4.11.3 Switching BIOS The IMBA-Q170-i2 equips with dual BIOS to support flexible I/O configuration. To switch BIOS1 to BIOS2 or BIOS2 to BIOS1 successfully, please follow the steps below and refer to Figure 4-18 and Table 4-2 for the BIOS switch location and settings.
Seite 93
IMBA-Q170-i2 ATX Motherboard 4.11.4 Flexible I/O Configuration The optional USB 3.0 and PCie Mini and mSATA expansion cards provide more expansion options to meet user’s demand. However, the S_ATA3 and S_ATA4 connectors will be disabled when the PCIEX4_3 slot is installed with the optional PCIe Mini and mSATA expansion card or a PCIe x4 expansion card.
Seite 94
IMBA-Q170-i2 ATX Motherboard 4.11.5 Flash Descriptor Security Override Jumper The flash descriptor security override jumper (J_FLASH1) allows to enable or disable the ME firmware update. Refer to Table 4-4 and Figure 4-19 for the jumper location and settings. Setting Description...
Seite 95
IMBA-Q170-i2 ATX Motherboard 4.11.6 mSATA Setup The mSATA setup jumper specifies whether to automatically detect the mSATA device installed in the PCIe Mini slot (MPCIE1). If the user shorts the mSATA setup jumper to force the system to enable mSATA device, the S_ATA6 connector will be disabled.
Seite 96
This section outlines the installation of peripheral devices to the onboard connectors. 4.12.1 SATA Drive Connection The IMBA-Q170-i2 is shipped with two SATA drive cables. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.
Seite 97
IMBA-Q170-i2 ATX Motherboard Figure 4-21: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-22.
Seite 98
IMBA-Q170-i2 ATX Motherboard Figure 4-22: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 4.13 Adding USB 3.0 Drivers to a Windows 7 Installation Image The Windows 7 installation media does not include native driver support for USB 3.0. In order to use the USB keyboard or mouse connected to a USB 3.0 port during OS...
Seite 99
IMBA-Q170-i2 ATX Motherboard NOTE: The OS version of the computer can be Windows 7, Windows 8.1 or Windows 10. Step 4: Connect the USB drive containing the Windows 7 installation image to the computer. Step 5: Right click on Installer_Creator.exe from the extracted files and select Run as administrator.
Seite 100
® 4.14 Intel AMT Setup Procedure The IMBA-Q170-i2 is featured with the Intel® Active Management Technology (AMT). To enable the Intel® AMT function, follow the steps below. Step 1: Make sure at least one of the memory sockets is installed with a DDR4 DIMM.
Seite 101
Connect an Ethernet cable to the RJ-45 connector labeled LAN2_USB2 (Figure 3-34). 4.15.2 Using the IEI iMAN Web GUI To manage a client system from a remote console using IEI iMAN Web GUI, follow the steps below. Step 1: Obtain the IP address of the managed system. It is recommended to use the IPMI Tool on the managed system to obtain the IP address.
Seite 102
IMBA-Q170-i2 ATX Motherboard a. Copy the Ipmitool.exe file to a bootable USB flash drive. b. Insert the USB flash drive to the IMBA-Q170-i2 c. The IMBA-Q170-i2 boots from the USB flash drive d. Enter the following command: ipmitool 20 30 02 01 03 00 00 (there is a space between each two-digit number) e.
Seite 103
Figure 4-26: IEI iMAN Web GUI NOTE: To understand how to use the IEI iMAN Web GUI, please refer to the iRIS-2400 Web GUI user manual in the utility CD came with the IMBA-Q170-i2. The user manual describes each function in detail.
Seite 104
IMBA-Q170-i2 ATX Motherboard Chapter BIOS Page 88...
IMBA-Q170-i2 ATX Motherboard 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
IMBA-Q170-i2 ATX Motherboard Function Decrease the numeric value or make changes Page Up Move to the previous page Page Dn Move to the next page Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu --...
Seite 107
IMBA-Q170-i2 ATX Motherboard 5.1.5 BIOS Menu Bar The menu bar on top of the BIOS screen has the following main items: Main – Changes the basic system configuration. Advanced – Changes the advanced system settings. Chipset – Changes the chipset settings.
Seite 108
IMBA-Q170-i2 ATX Motherboard Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Server Mgmt BIOS Information Set the Date. Use Tab to BIOS Vendor American Megatrends switch between Date Core Version 5.11...
Seite 109
IMBA-Q170-i2 ATX Motherboard The Main menu has two user configurable fields: System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
IMBA-Q170-i2 ATX Motherboard 5.3.1 Trusted Computing Use the Trusted Computing menu (BIOS Menu 3) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Configuration...
IMBA-Q170-i2 ATX Motherboard 5.3.2 ACPI Settings The ACPI Settings menu (BIOS Menu 4) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced ACPI Settings Select ACPI sleep state the system will enter...
IMBA-Q170-i2 ATX Motherboard 5.3.3 AMT Configuration The AMT Configuration menu (BIOS Menu 5) allows the Intel® AMT options to be configured. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Intel AMT [Enabled] Enable/Disable Intel (R) Un-Configure ME...
IMBA-Q170-i2 ATX Motherboard 5.3.4 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced...
IMBA-Q170-i2 ATX Motherboard 5.3.4.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 7) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Serial Port n Configuration Enable or Disable Serial...
Seite 115
IMBA-Q170-i2 ATX Motherboard IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 2F8h and the interrupt IO=2F8h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=3E8h;...
Seite 116
IMBA-Q170-i2 ATX Motherboard IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 2F8h and the interrupt IO=2F8h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=3E8h;...
Seite 117
IMBA-Q170-i2 ATX Motherboard IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 3E8h and the interrupt IO=3E8h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=2E8h;...
Seite 118
IMBA-Q170-i2 ATX Motherboard IO=3E8h; Serial Port I/O port address is 3E8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 2E8h and the interrupt IO=2E8h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=2D0h;...
Seite 119
IMBA-Q170-i2 ATX Motherboard IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 2D0h and the interrupt IO=2D0h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=2E0h;...
Seite 120
IMBA-Q170-i2 ATX Motherboard IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 2D0h and the interrupt IO=2D0h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=2E0h;...
Seite 121
IMBA-Q170-i2 ATX Motherboard Change Settings [Auto] Use the Change Settings option to change the parallel port IO port address and interrupt address. Auto The parallel port IO port address and interrupt EFAULT address are automatically detected. Parallel Port I/O port address is 378h and the IO=378h;...
Seite 122
IMBA-Q170-i2 ATX Motherboard 5.3.5 iWDD H/W Monitor The iWDD H/W Monitor menu (BIOS Menu 9) contains the fan configuration submenu, and displays the system temperature and CPU fan speed. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced...
Seite 123
IMBA-Q170-i2 ATX Motherboard +12V +5VSB +3.3V +3.3VSB 5.3.5.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 10) to configure the CPU/system fan temperature and speed settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Seite 124
IMBA-Q170-i2 ATX Motherboard Auto mode fan start/off temperature Use the + or – key to change the Auto mode fan start/off temperature value. Enter a decimal number between 1 and 100. Auto mode fan start PWM Use the + or – key to change the Auto mode fan start PWM value. Enter a decimal number between 1 and 100.
Seite 125
IMBA-Q170-i2 ATX Motherboard Wake system with Fixed Time [Disabled] Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event. Disabled The real time clock (RTC) cannot generate a wake EFAULT event Enabled...
IMBA-Q170-i2 ATX Motherboard 5.3.7 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 12) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port.
Seite 127
IMBA-Q170-i2 ATX Motherboard Disabled Disabled the console redirection function EFAULT Enabled the console redirection function Enabled The following options are available in the Console Redirection Settings submenu when the Console Redirection option is enabled. Terminal Type [ANSI] Use the Terminal Type option to specify the remote terminal type.
Seite 128
IMBA-Q170-i2 ATX Motherboard Parity [None] Use the Parity option to specify the parity bit that can be sent with the data bits for detecting the transmission errors. None No parity bit is sent with the data bits. EFAULT The parity bit is 0 if the number of ones in the data Even bits is even.
Seite 129
IMBA-Q170-i2 ATX Motherboard 5.3.7.1 Legacy Console Redirection Settings Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Legacy Serial Redirection Port [COM1] Select a COM port to display redirection of Legacy OS and Legacy OPROM Messages. --------------------- : Select Screen ↑...
IMBA-Q170-i2 ATX Motherboard 5.3.8 CPU Configuration Use the CPU Configuration menu (BIOS Menu 14) to view detailed CPU specifications or enable the Intel Virtualization Technology. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced CPU Configuration Enable for Windows XP and Linux (OS optimized for Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz...
Seite 131
IMBA-Q170-i2 ATX Motherboard Active Processor Cores [All] Use the Active Processor Cores BIOS option to enable numbers of cores in the processor package. Enable all cores in the processor package. EFAULT Enable one core in the processor package. Intel Virtualization Technology [Disabled] Use the Intel Virtualization Technology option to enable or disable virtualization on the system.
IMBA-Q170-i2 ATX Motherboard 5.3.9 SATA Configuration Use the SATA Configuration menu (BIOS Menu 15) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced SATA Controller(s)
IMBA-Q170-i2 ATX Motherboard Hot Plug [Disabled] Use the Hot Plug option to designate the correspondent SATA port as hot-pluggable. Disables the hot-pluggable function of the SATA port. Disabled EFAULT Enabled Designates the SATA port as hot-pluggable. 5.3.10 NVMe Configuration Use the NVMe Configuration (BIOS Menu 16) menu to display the NVMe controller and device information.
IMBA-Q170-i2 ATX Motherboard 5.3.11 USB Configuration Use the USB Configuration menu (BIOS Menu 17) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.
Seite 135
IMBA-Q170-i2 ATX Motherboard 5.3.12 iEi Feature Use the iEi Feature menu (BIOS Menu 18) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function...
Seite 136
IMBA-Q170-i2 ATX Motherboard 5.4 Chipset Use the Chipset menu (BIOS Menu 19) to access the PCH IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
IMBA-Q170-i2 ATX Motherboard 5.4.1 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 20) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset VT-d Supported VT-d capability...
IMBA-Q170-i2 ATX Motherboard 5.4.1.1 Graphics Configuration Use the Graphics Configuration (BIOS Menu 21) menu to configure the video device connected to the system. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Graphics Configuration Select which of IGFX/PEG/PCI Graphics...
Seite 139
IMBA-Q170-i2 ATX Motherboard 128M 256M Default 512M DVMT Total Gfx Mem [MAX] Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used by the internal graphic device. The following options are available: 128M 256M Default...
IMBA-Q170-i2 ATX Motherboard Enable Root Port [Auto] Use the Enable Root Port option to enable or disable the PCI Express (PEG) controller. Disables the PCI Express (PEG) controller. Disabled Enabled Enables the PCI Express (PEG) controller. Auto The PCI Express (PEG) controller is disabled if EFAULT no PCI Express devices are connected.
IMBA-Q170-i2 ATX Motherboard 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 24) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Auto Power Button Status [Disable (ATX)] Select AC power state...
IMBA-Q170-i2 ATX Motherboard USB Power SW1 [+5V DUAL] Use the USB Power SW1 BIOS option to configure the USB power source for the corresponding USB connectors (Table 5-2). Sets the USB power source to +5V +5V DUAL Sets the USB power source to +5V dual...
Seite 143
IMBA-Q170-i2 ATX Motherboard This section will show various BIOS menus and options for different BIOS (BIOS1 or BIOS2). For BIOS1: Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PCI Express Configuration Select PCIEX4_3 slot function. (BIOS No.1)
Seite 144
IMBA-Q170-i2 ATX Motherboard For BIOS2: Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PCI Express Configuration Select PCIEX4_3 slot function. (BIOS No.2) Enable/Disable PCIEX4_3 PCIEX4_1 Slot Mode PCIe 1x4 Slot Slot or SATA Port 3/4. PCIEX4_2 Slot Mode USB 3.0(Use F347 Card)
Seite 145
IMBA-Q170-i2 ATX Motherboard 5.4.2.1.1 PCIEX4_1 Slot, PCIEX4_2 Slot, PCIEX4_3 Slot and MPCIE1 Slot Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced PCIe Speed [Auto] Select PCI Express port Detect Non-Compliance Device [Disabled] speed. --------------------- : Select Screen ↑...
IMBA-Q170-i2 ATX Motherboard 5.4.2.2 HD Audio Configuration Use the HD Audio Configuration menu (BIOS Menu 26) to configure the PCH Azalia settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset HD Audio Configuration Control Detection of the HD-Audio device.
Seite 147
IMBA-Q170-i2 ATX Motherboard 5.5 Security Use the Security menu (BIOS Menu 29) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Server Mgmt Password Description...
Seite 148
IMBA-Q170-i2 ATX Motherboard 5.6 Boot Use the Boot menu (BIOS Menu 30) to configure system boot options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Server Mgmt Boot Configuration Select the keyboard...
Seite 149
IMBA-Q170-i2 ATX Motherboard Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Normal POST messages displayed Disabled Enabled OEM Logo displayed instead of POST messages EFAULT Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.
IMBA-Q170-i2 ATX Motherboard 5.7 Save & Exit Use the Safe & Exit menu (BIOS Menu 31) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main...
IMBA-Q170-i2 ATX Motherboard 5.8 Server Mgmt Use the Server Mgmt menu (BIOS Menu 32) to configure system event log and BMC network parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit...
Seite 152
IMBA-Q170-i2 ATX Motherboard SEL Components [Enabled] Use the SEL Components option to enable or disable all features of System Event Log during boot. Disabled System Event Log features disabled. System Event Log features enabled. Enabled EFAULT Erase SEL [No] Use the Erase SEL option to select an option for erasing SEL (system event log).
IMBA-Q170-i2 ATX Motherboard 5.8.2 BMC Network Configuration Use the BMC Network Configuration menu (BIOS Menu 34) to configure BMC network parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Server Mgmt BMC network configuration Select to configure LAN...
Seite 154
IMBA-Q170-i2 ATX Motherboard DynamicBmcDhcp Select to configure LAN channel parameters dynamically by BMC Select to configure LAN channel DynamicBmcNonDhcp parameters dynamically by BIOS Page 138...
Seite 155
IMBA-Q170-i2 ATX Motherboard Chapter Software Drivers Page 139...
Kernel-Mode Driver Framework (Windows 7 OS only) Intel® Serial IO (Windows 8.1/10 64-bit OS only) 6.2 Software Installation All the drivers for the IMBA-Q170-i2 are on the CD that came with the system. To install the drivers, please follow the steps below. Step 1: Insert the CD into a CD drive connected to the system.
Seite 157
IMBA-Q170-i2 ATX Motherboard Figure 6-1: Introduction Screen Step 3: Click IMBA-Q170-i2. Step 4: A new screen with a list of available drivers appears (Figure 6-2). Figure 6-2: Available Drivers Step 5: Install all of the necessary drivers in this menu.
Seite 159
IMBA-Q170-i2 ATX Motherboard DECLARATION OF CONFORMITY This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or installs other devices in the equipment, the CE conformity declaration may no longer apply. FCC WARNING This equipment complies with Part 15 of the FCC Rules.
Seite 161
IMBA-Q170-i2 ATX Motherboard CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union–If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
Seite 162
IMBA-Q170-i2 ATX Motherboard Appendix BIOS Options Page 146...
Seite 163
IMBA-Q170-i2 ATX Motherboard Below is a list of BIOS configuration options in the BIOS chapter. System Date [xx/xx/xx] ......................93 System Time [xx:xx:xx] .......................93 Security Device Support [Enable] ..................94 ACPI Sleep State [S3 (Suspend to RAM)]................95 ...
Seite 164
IMBA-Q170-i2 ATX Motherboard Data Bits [8] ........................111 Parity [None]........................112 Stop Bits [1] ........................112 Legacy Serial Redirection Port [COM1]................113 Hyper-threading [Enabled]....................114 Active Processor Cores [All] ................... 115 Intel Virtualization Technology [Disabled] ..............115 ...
Seite 165
IMBA-Q170-i2 ATX Motherboard UEFI Boot [Disabled] ......................133 Save Changes and Reset ....................134 Discard Changes and Reset .................... 134 Restore Defaults ....................... 134 Save as User Defaults ...................... 134 Restore User Defaults ...................... 134 ...
Seite 166
IMBA-Q170-i2 ATX Motherboard Appendix Terminology Page 150...
Seite 167
IMBA-Q170-i2 ATX Motherboard AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
Seite 168
IMBA-Q170-i2 ATX Motherboard DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
Seite 169
IMBA-Q170-i2 ATX Motherboard LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
Seite 170
IMBA-Q170-i2 ATX Motherboard Appendix Digital I/O Interface Page 154...
IMBA-Q170-i2 ATX Motherboard E.1 Introduction The DIO connector on the IMBA-Q170-i2 is interfaced to GPIO ports on the Super I/O chipset. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
Seite 172
IMBA-Q170-i2 ATX Motherboard E.2 Assembly Language Sample 1 AX, 6F08H ;setting the digital port as input AL low byte = value AH – 6FH Sub-function: AL – 9 :Set the digital port as OUTPUT :Digital I/O input value E.3 Assembly Language Sample 2 AX, 6F09H ;setting the digital port as output...
Seite 174
NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
Seite 175
IMBA-Q170-i2 ATX Motherboard NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
Seite 177
IMBA-Q170-i2 ATX Motherboard G.1 Introduction The IMBA-Q170-i2 can provide data protection for serial ATA (SATA) disks via the Intel® Matrix Storage Manager using one of three fault-tolerant RAID levels: RAID 1, 5 or 10. When using two hard drives, matrix RAID allows RAID 0 and RAID 1 functions to be combined, where critical files can be stored on RAID 1, and RAID 0 can be used for non-critical items such as software.
IMBA-Q170-i2 ATX Motherboard CAUTION! Do not accidentally disconnect the SATA drive cables. Carefully route the cables within the chassis to avoid system down time. G.2 Features and Benefits Supports RAID levels 0, 1, 5 and 10 Supports connectivity to two or more disk drives G.3 Accessing the Intel®...
Seite 179
IMBA-Q170-i2 ATX Motherboard Step 4: Save and Exit BIOS. After the SATA support option is enabled, save and exit the BIOS. Step 5: Reboot the system. Reboot the system after saving and exiting the BIOS. Step 6: Press Ctrl+I. during the system boot process. Press Ctrl+I when prompted to enter the RAID configuration software.
Seite 181
IMBA-Q170-i2 ATX Motherboard The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.