Troubleshooting - Clatronic KB 3713 Bedienungsanleitung

WARNING:
• Always disconnect the appliance from the mains power supply
before cleaning.
• Do not immerse the appliance in water! It could result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
1. The lid is removable. Pull the lid upwards out of the
holder. Pay attention to the guidings.
2. Use a moist towel to clean the inside and the outside.
You may add a dishwashing liquid to the towel.
3. Dry it with a cloth afterwards.
4. Fasten the lid back into the holder.
Storage
• Clean the appliance as described and allow it to dry.
• If necessary, store the DC cable in the cable storage
compartment.
• We recommend to keep the appliance in the original
packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children in
a dry, well ventilated place.

Troubleshooting

Problem Possible cause
The appliance No power supply. Check the connection
is not working.
The appliance is
defect.
KB3713_IM
Cleaning
Problem
Appliance
does not work
with direct
current.
Model:........................................................................KB 3713
Protection class: ...................................................................
Net weight: ....................................................... approx. 3.4 kg
Capacity: ............................................................max. 25 Litre
Alternating current
Power supply:..................................... 220 - 240 V~, 50 / 60 Hz
Power consumption cooling: ...........................................55 W
Direct current
Solution Power supply:............................................................. 12 V
Power consumption cooling: ...........................................45 W
to the energy source.
The right to make technical and design modifications in
the course of continuous product development remains
Check the domestic
reserved.
power socket with a
different appliance.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
Check the fusebox.
ity and low voltage directives, and has been constructed in
Does the cigarette
accordance with the latest safety regulations.
lighter of your motor
vehicle work without
a problem?
Consult our service
department or an
expert.
Possible cause Solution
The fuse in the Replace the fuse. You
plug of the 12 V can obtain one from a
power cord is specialized dealer.
faulty.
The cigarette Contact a specialist
lighter of your for motor vehicles.
motor vehicle is
faulty.
Technical Data
ECO: .............................................8 W
19.11.18
31