Startup - Sonoro goLondon Bedienungsanleitung

4.

Startup

a. Establish Power Supply
Unpack the device and all accessories and check the content for com-
pleteness and proper condition.
NOTE!
In case you detect damage due to transportation or if parts of the
packet are missing, contact your dealer immediately.
The device is powered via the power supply unit that comes with
the packet. Slide the adapter onto the power supply unit until it has
snapped into position.
Plug the connecting plug of the power supply into the 12V
port on the back of the device.
Plug the power plug into an electrical outlet.
40
A_GoDAB+_4_sprachig_90x85_RZ_fertig_1+Tabs.indd 40
1.2A DC
04.05.2012 16:52:42