Manta CLK001 Bedienungsanleitung Seite 7

User's Manual E N
HOW TO USE THE LED BACKLIGHT
Press the SNOOZE-LIGHT button to turn on the LED backlight for 5 seconds.
How To Set 12 hour or 24 hour Display
Press and hold the SET button to 2 seconds. The offset time will appear.
Press the SET button again. The 12hr or 24hr display will blink. Press the up
or down button to toggle back and forth between 12 hr and 24 hr display
mode. Press button SET to exit 12hr or 24 hr setting mode.
USER MANUAL
1.Press and hold the SET button for 2 seconds. The 12hr 24 hr mode will blink.
If in 12hr mode the PM indicator will show afternoon hours.The PM indicator
will not show for morning hours. Press the up or down button to reach the
desired hour.
2. Press the SET button again. The hour will begin to blink. Press the up or
down button to reach the desired hour.
3.Press SET button again, then minute will blink. Press the up or down button
to reach the desired minutes.
4. Press the SET button again. The year will begin to blink. Press the up or
down button to reach the desired year.
5Press the SET button again. The day will begin to blink. Press the up or down
button to reach the desired day.
6.Press SET button again, then month will blink. Press the up or down button
to reach the desired month.
7.Press the SET button again to exit setting mode.
8.Press DOWN button to switch ℃ and ℉.
NOTE: You may press the SET button anytime to exit the setting mode.
HOW TO SET AND ACTIVATE THE ALARM
This unit is equipped with 1 alarm: Single Alarm
For the Single Alarm, it will go off only once at the preset time.
To set the single alarm:
1. Press the ALM-SET button. The single alarm icon will appear.
2. Press and hold the ALM-SET button for 2 seconds to enter the setting mode.
The hour will begin to blink. Press the up or down button to reach the desired
hour.
7